Problems preventing parts from being sectioned in the drawing view

[Anonymous]

Can anyone else duplicate this problem? Create a section view in the
drawing of an assembly. Then "Show Contents" on the section view. Pick one
of the parts in the browser or window (selection priority set to part) and
clear the "Section" option. This should prevent the selected part from
being sectioned but it does absolutely nothing for me. The part remains
sectioned regardless of the setting.


Thanks
Ron Myers

[Anonymous]

Ron,

you need to do this on the parent view (i.e the one with the section line
through it)

Not the view that is sectioned

HTH

Rory


"Ron Myers" wrote in message
news:AFA11F86FD3F4BECADCBB35CB78BD0A9@in.WebX.maYIadrTaRb...
> Can anyone else duplicate this problem? Create a section view in the
> drawing of an assembly. Then "Show Contents" on the section view. Pick
one
> of the parts in the browser or window (selection priority set to part) and
> clear the "Section" option. This should prevent the selected part from
> being sectioned but it does absolutely nothing for me. The part remains
> sectioned regardless of the setting.
>
>
> Thanks
> Ron Myers
>
>

[Anonymous]

Thanks Rory, that should have been obvious, things just aren't too clear
after staying up 24 hours 🙂

Thanks
Ron

"Rory" wrote in message
news:8DBF6519AFF1A89F42478395CE001537@in.WebX.maYIadrTaRb...
> Ron,
>
> you need to do this on the parent view (i.e the one with the section line
> through it)
>
> Not the view that is sectioned
>
> HTH
>
> Rory
>
>
> "Ron Myers" wrote in message
> news:AFA11F86FD3F4BECADCBB35CB78BD0A9@in.WebX.maYIadrTaRb...
> > Can anyone else duplicate this problem? Create a section view in the
> > drawing of an assembly. Then "Show Contents" on the section view. Pick
> one
> > of the parts in the browser or window (selection priority set to part)
and
> > clear the "Section" option. This should prevent the selected part from
> > being sectioned but it does absolutely nothing for me. The part remains
> > sectioned regardless of the setting.
> >
> >
> > Thanks
> > Ron Myers
> >
> >
>
>