Inventor General Discussion

Inventor General Discussion

Reply
Valued Contributor
SORJM
Posts: 60
Registered: ‎05-01-2010
Message 1 of 7 (486 Views)
Accepted Solution

Problems after installation of Service Pack 1 of Autodesk Inventor 2012

486 Views, 6 Replies
03-02-2012 07:14 AM

After installing the Service Pack 1 of Autodesk Inventor 2012, shortcut keys like M (Measure Tool), Ctrl+0 (Clean Screen) has stopped working. Dimensions are not placed automatically during line, arc,etc creation. 

Please help me in solving this problem?

Thanks in advance.

 

 

 

 

 

 

 

 

 

Nisheeth Srivastava

Inventor 3-D Parametric Solid Model Drawing (Video Tutorials)

My CAD Creations

Distinguished Mentor
john.retzlaff
Posts: 920
Registered: ‎11-03-2003
Message 2 of 7 (478 Views)

Re: Problems after installation of Service Pack 1 of Autodesk Inventor 2012

03-02-2012 08:06 AM in reply to: SORJM

Try right clicking gray area of ribbon, customize user commands, Keyboard tab, button Reset All Keys.

For dimensions, check Application Options, Sketch tab, check your settings under Heads Up Display.

John Retzlaff
Valued Contributor
SORJM
Posts: 60
Registered: ‎05-01-2010
Message 3 of 7 (463 Views)

Re: Problems after installation of Service Pack 1 of Autodesk Inventor 2012

03-02-2012 01:51 PM in reply to: john.retzlaff

John Retzlaff

After applying your suggestion Ctrl+0, Ctrl+S started working but M (Measure Tool), L (Line tool ) F7 ( slice graphic) shortcuts are still not working. Dynamic Input is appearing in the window, but to understand the my problem watch the video below

Dynamic Input

 

 

Regards

Nisheeth Srivastava

Inventor 3-D Parametric Solid Model Drawing (Video Tutorials)

My CAD Creations


Valued Mentor
coreyparks
Posts: 485
Registered: ‎06-07-2010
Message 4 of 7 (454 Views)

Re: Problems after installation of Service Pack 1 of Autodesk Inventor 2012

03-02-2012 02:27 PM in reply to: SORJM

Go into the Inventor application options and turn on the settings you see in the attached picture.  When you try the shortcuts it will show what ones are available when you type.  My guess is there are now more shortcuts that start with the same letter as the ones you are using.  If there are multiple that start with L in order to fire off the line command you will need to remove all others that start with L in that environment or hit the enter or spacebar after typing L to fire off the cammand.  Hope this helps.

Please mark this response "Accept as solution" if it answers your question.
-------------------------------------------------------------------------------------
Corey Parks
IV2014 Factory Design Suite Ultimate
Windows 7 64 bit
Synergis Adept document management software
16gb RAM --- Nvidia Quadro 4000 2gb
Valued Contributor
SORJM
Posts: 60
Registered: ‎05-01-2010
Message 5 of 7 (319 Views)

Re: Problems after installation of Service Pack 1 of Autodesk Inventor 2012

05-23-2012 01:41 AM in reply to: SORJM

Hello John Retzlaff,

I have reacently facing a new problem with ribon tab. While working on drawing file on ribbon pannel Annotate tab is not visible. Instead of this Annotate (ESKD) is visible. I tried reset ribbon but the problem is still the same. See the screen shot below.

How can I solve this problem?

 

Regards

Nisheeth Srivastava

Inventor 3-D Parametric Solid Model Drawing (Video Tutorials)

My CAD Creations



 

Annotate Tab problem.png

 


Distinguished Mentor
john.retzlaff
Posts: 920
Registered: ‎11-03-2003
Message 6 of 7 (302 Views)

Re: Problems after installation of Service Pack 1 of Autodesk Inventor 2012

05-23-2012 05:12 AM in reply to: SORJM

Go to Tools, Add-Ins and unload ESKD Support.

John Retzlaff
Valued Contributor
SORJM
Posts: 60
Registered: ‎05-01-2010
Message 7 of 7 (280 Views)

Re: Problems after installation of Service Pack 1 of Autodesk Inventor 2012

05-23-2012 05:00 PM in reply to: john.retzlaff

Thanks a lot  john.retzlaff. After applying the settings mentioned by you my problem solved.

 

Regards

Nisheeth Srivastava

Inventor 3-D Parametric Solid Model Drawing (Video Tutorials)

My CAD Creations


Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.