Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Problem with sheet metal saved to DXF

1 REPLY 1
Reply
Message 1 of 2
Anonymous
156 Views, 1 Reply

Problem with sheet metal saved to DXF

Hello group

With R6 I have troubles with sheet metal exported to DXF.

I have a sheet metal part which has a tilted cut on one end. which gives a
S-shape on that end. When I open the DXF file in Autocad and our CAM
software, the S-shape lines are gone, and I have to manually draw them in
Autocad.

We had a similar problem in R4, R5 and R5.6 worked fine.

Anyone know how to solve this?
If not, Autodesk, please correct this as soon as posible.



Best Regards
Claus Frolund
www.krog-iversen.dk
1 REPLY 1
Message 2 of 2
Anonymous
in reply to: Anonymous

Problems solved.
The reason why the lines were gone, was because they were black as the
background. Strange, but Inventor has changed the line color for those
particular lines.

Claus

"Claus Frølund" skrev i en meddelelse
news:85B595A8B094A2F6B77C6B6653EFCB8C@in.WebX.maYIadrTaRb...
> Hello group
>
> With R6 I have troubles with sheet metal exported to DXF.
>
> I have a sheet metal part which has a tilted cut on one end. which gives a
> S-shape on that end. When I open the DXF file in Autocad and our CAM
> software, the S-shape lines are gone, and I have to manually draw them in
> Autocad.
>
> We had a similar problem in R4, R5 and R5.6 worked fine.
>
> Anyone know how to solve this?
> If not, Autodesk, please correct this as soon as posible.
>
>
>
> Best Regards
> Claus Frolund
> www.krog-iversen.dk
>
>
>

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report