Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have been attempting to make an ACME threaded shaft it is a 3/4-5 std acme and the shaft has a 1/2" x 1 1/2" then 29 1/2" inch 3/4-5 acme then 1/2" x 3", It appears if I use the pitch and length option it gives me a modeling error using 29.75 inch for length .200 for pitch anything past 10" seems to fail. I am trying to cut the thread any help would be appreciated.
Coils are incredibly picky especially on cutting/
subtraction of material. If there's a chance you can post model to CF or just
the sketch profile off tooth form we might be able to help. Are you saying that
your shaft has three separate threads on it?
I
have been attempting to make an ACME threaded shaft it is a 3/4-5 std acme and
the shaft has a 1/2" x 1 1/2" then 29 1/2" inch 3/4-5 acme then 1/2" x 3", It
appears if I use the pitch and length option it gives me a modeling error
using 29.75 inch for length .200 for pitch anything past 10" seems to fail. I
am trying to cut the thread any help would be
appreciated.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")