Inventor General Discussion

Inventor General Discussion

Reply
Member
aaddekrom2279
Posts: 5
Registered: ‎03-24-2009
Message 1 of 7 (143 Views)

Placed Tooling Part Invisible ?

143 Views, 6 Replies
05-13-2009 03:23 AM
When I place a plastic part (or Core/Cavity) in a Mold Design iam. The screen stays empty.....

Editing it via the browser shows the parts are there ?!?

Also the Cube dissapears......

So what is going on ?

All drivers updated, XP64bit, QuadroFX4600, 8GRam
*Expert Elite*
JDMather
Posts: 28,262
Registered: ‎04-20-2006
Message 2 of 7 (143 Views)

Re: Placed Tooling Part Invisible ?

05-13-2009 06:32 AM in reply to: aaddekrom2279
If you reboot does the ViewCube return?

Does the part in the Mold Design Tutorial work?

Can you zip and attach the assembly here?
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
aaddekrom2279
Posts: 5
Registered: ‎03-24-2009
Message 3 of 7 (143 Views)

Re: Placed Tooling Part Invisible ?

05-13-2009 07:12 AM in reply to: aaddekrom2279
Reboot nor reinstalling Tooling changed something.

Cube is there but when i point at it or at the node from the mobile in the browser, CPU usage goes up for a
while, after that Cube dissapears or freezes.

I can edit the base component of the Mobile, no issues in the part environment there.


Attached the iam and an image.
Member
aaddekrom2279
Posts: 5
Registered: ‎03-24-2009
Message 4 of 7 (143 Views)

Re: Placed Tooling Part Invisible ?

05-13-2009 07:34 AM in reply to: aaddekrom2279
Update;


Placing the assembly in an idw works fine.
*Henry Zhao\(Autodesk\)
Message 5 of 7 (143 Views)

Re: Placed Tooling Part Invisible ?

05-13-2009 11:09 PM in reply to: aaddekrom2279

I can see the invisibility issue after opening your
attached assembly.

You can try to press "Home" Key or click "Zoom All"
command in the Ribbon tab. It will zoom the part into the graphic
window.

I am not sure what's the reason about this issue.
Could you please post your detail workflow about the creation? So that we can
reproduce and investigate it.

 

Thanks,

Henry


style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
Reboot
nor reinstalling Tooling changed something. Cube is there but when i point at
it or at the node from the mobile in the browser, CPU usage goes up for a
while, after that Cube dissapears or freezes. I can edit the base component of
the Mobile, no issues in the part environment there. Attached the iam and an
image.
Member
aaddekrom2279
Posts: 5
Registered: ‎03-24-2009
Message 6 of 7 (143 Views)

Re: Placed Tooling Part Invisible ?

05-17-2009 09:56 PM in reply to: aaddekrom2279
I tried "zoom all", "find in window" etc....


Just followed (exactly) the instructions from the "general mold workflow" tutorial that comes with tooling.

When i place other parts than the mobile it makes no difference, nothing will show up.
Changing Color or Display options make no difference.
Roll Back Graphics driver make no difference.
*Expert Elite*
JDMather
Posts: 28,262
Registered: ‎04-20-2006
Message 7 of 7 (143 Views)

Re: Placed Tooling Part Invisible ?

05-18-2009 04:52 AM in reply to: aaddekrom2279
Zip and attach the assembly here.
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.