Inventor General Discussion

Inventor General Discussion

Reply
Active Member
9 Posts
0 Kudos
Registered: ‎09-16-2012
Post 1 of 5
Accepted Solution

Physical Inventor properties

787 Views, 4 Replies
09-16-2012 09:34 AM

In properties on physical tab Plumbum has density 0.940 g/cm3, but it should be 11.34 g/cm3. But in material editor it has right value. What should I do? Maybe it is config file somewhere?

Thank you for answers. After checking Lead in properties, I closed properties window. After reopening properties it is all right. And every time like this: Lead value is wrong, but after accepting and reopening Properties, value became correct.

*Pro
1,997 Posts
285 Kudos
Registered: ‎09-15-2003
Post 2 of 5

Re: Physical Inventor properties

09-17-2012 05:13 AM in reply to: bodich

In English, I think the material you're referring to is "Lead".

 

As far as the density: it appears that you are using Inventor 2013; when I create a part in 2013 made of lead, the density in iProperties matches the Material properties.  Is it possible that the density has been manually edited in the file?

*Expert Elite*
28,672 Posts
2,132 Kudos
Registered: ‎04-20-2006
Post 3 of 5

Re: Physical Inventor properties

09-17-2012 05:17 AM in reply to: bodich

Attach the file here or create a cube 1cm x 1cm x 1cm and attach it here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
84 Posts
1 Kudo
Registered: ‎01-22-2004
Post 4 of 5

Re: Physical Inventor properties

11-09-2012 01:27 AM in reply to: JDMather

Hi,

 

I have the same problem with Aluminum.

If i create a simple new part / cube 10 x 10 x 10 cm. it has the correct weight and density.

But if i derive an assembly in to the part as a surface model the density change.

 

Kind regards

 

Henrik Graversen

 

Active Member
9 Posts
0 Kudos
Registered: ‎09-16-2012
Post 5 of 5

Re: Physical Inventor properties

12-01-2012 07:04 AM in reply to: bodich

Thank you for answers. After checking Lead in properties, I closed properties window. After reopening properties it is all right. And every time like this: Lead value is wrong, but after accepting and reopening Properties, value became correct.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!