Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
Cadmanto
Posts: 3,346
Registered: ‎12-07-2011
Message 1 of 4 (206 Views)
Accepted Solution

Parts List Wrapping Direction

206 Views, 3 Replies
12-06-2012 11:39 AM

When a parts list in an Inventor drawing is wrapped it always takes the bottom portion and kicks it to the left.

Is there a way to kick it to the right?  So when you are looking at the BOM it reads such that item 1 is in the first group and not the second.

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Hi Cadmanto,

 

You can right-click on the parts list and choose Edit Parts List, then click the Table Layout button, then set the wrap direction. I don't recall a way to set this up in the Parts List style, but there might be one.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

*Expert Elite*
Curtis_Waguespack
Posts: 2,987
Registered: ‎03-08-2006
Message 2 of 4 (191 Views)

Re: Parts List Wrapping Direction

12-06-2012 12:14 PM in reply to: Cadmanto

Hi Cadmanto,

 

You can right-click on the parts list and choose Edit Parts List, then click the Table Layout button, then set the wrap direction. I don't recall a way to set this up in the Parts List style, but there might be one.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
Cadmanto
Posts: 3,346
Registered: ‎12-07-2011
Message 3 of 4 (183 Views)

Re: Parts List Wrapping Direction

12-06-2012 12:44 PM in reply to: Curtis_Waguespack

Thanks Curtis.

That was almost too easy!!!  :smileyhappy:

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Valued Mentor
BLHDrafting
Posts: 350
Registered: ‎10-12-2012
Message 4 of 4 (161 Views)

Re: Parts List Wrapping Direction

12-06-2012 05:20 PM in reply to: Cadmanto

There is also a radio button set when placing the parts list. See graphic.

 

Capture.JPG

Brendan Henderson

Web www.blh.com.au
Twitter @BLHDrafting

Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!