Inventor General Discussion

Inventor General Discussion

Reply
Active Member
mikkele86
Posts: 10
Registered: ‎10-04-2012
Message 1 of 3 (196 Views)
Accepted Solution

Part list Form question

196 Views, 2 Replies
01-06-2013 08:14 AM

hi, im using inventor 2012.

 

im trying to put a part list on my drawings.

 

but for some reason, the part list is using a Gost Form. ( diffrent layout and polish/ russian text )

How do I go back to default. ?

 

NOTE: I have allready tried to reinstall inventor, no go.

Hi mikkele86,

 

I didn't look too closely at this, but you might see if your issue is related to the ESKD addin:

http://forums.autodesk.com/t5/Autodesk-Inventor/Parts-List-suddenly-defaulting-to-GOST/td-p/2505179

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

*Expert Elite*
Curtis_Waguespack
Posts: 2,934
Registered: ‎03-08-2006
Message 2 of 3 (183 Views)

Re: Part list Form question

01-06-2013 09:08 AM in reply to: mikkele86

Hi mikkele86,

 

I didn't look too closely at this, but you might see if your issue is related to the ESKD addin:

http://forums.autodesk.com/t5/Autodesk-Inventor/Parts-List-suddenly-defaulting-to-GOST/td-p/2505179

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Active Member
mikkele86
Posts: 10
Registered: ‎10-04-2012
Message 3 of 3 (172 Views)

Re: Part list Form question

01-06-2013 09:39 AM in reply to: Curtis_Waguespack

ahh.. yes sir. thats the problem.

I unloaded the ESKD plugin and restarted inventor.

everything is back to normal :smileyvery-happy:

thank you

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.