Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
sps_cad_guy
Posts: 127
Registered: ‎08-22-2012
Message 1 of 4 (117 Views)
Accepted Solution

Part forming question

117 Views, 3 Replies
09-19-2012 08:52 AM

I am working on a part where the customer is supplying us with some blank

plates 24" square. They want us to put a 4" bent leg on the part.

What I need to know is, in Inventor, how do I go about this?

I have done this in SW, but can not figure out how in Inventor.

Thank you very much for  your help.

Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
*Expert Elite*
JDMather
Posts: 26,616
Registered: ‎04-20-2006
Message 2 of 4 (115 Views)

Re: Part forming question

09-19-2012 09:01 AM in reply to: sps_cad_guy

Bend Part (hidden command).

But I would probably model as-bent.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Mentor
mpatchus
Posts: 464
Registered: ‎10-22-2008
Message 3 of 4 (111 Views)

Re: Part forming question

09-19-2012 09:16 AM in reply to: sps_cad_guy

The bend faeture works pretty well for simple bends.

But as JD said, more complex parts work better by modeling.

Or go into the Sheet Metal environment.

Bend.JPG

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
Distinguished Contributor
sps_cad_guy
Posts: 127
Registered: ‎08-22-2012
Message 4 of 4 (105 Views)

Re: Part forming question

09-19-2012 09:41 AM in reply to: mpatchus

Thank  you very much for your help.

 

Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.