Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
sam__gleeson
Posts: 46
Registered: ‎10-11-2012
Message 1 of 7 (283 Views)
Accepted Solution

need help with plastic part

283 Views, 6 Replies
04-15-2013 06:30 AM

Hello All

 

First attempt at a plastic part...are there tools for plastic parts to make this part,,,i have a couple of improvements i need a little help with please...hopefully the pictures explain

 

Cheers

 

Sam

See attached, let me know if you can't figure out what I did.

Hi. Here's my version of the same part as promised.

Mike

Valued Contributor
mikejones
Posts: 82
Registered: ‎10-09-2007
Message 2 of 7 (276 Views)

Re: need help with plastic part

04-15-2013 07:06 AM in reply to: sam__gleeson

I couldn't open your part as we're still on 2012 here so I have attached a remodeled part for you to look at.

 

Mike

Autodesk Certified Professional
Valued Contributor
mikejones
Posts: 82
Registered: ‎10-09-2007
Message 3 of 7 (271 Views)

Re: need help with plastic part

04-15-2013 07:08 AM in reply to: mikejones

Hmmm, I don't appear to be able to attach the part file so I'll have a go again later on a different machine.

Autodesk Certified Professional
Active Contributor
sam__gleeson
Posts: 46
Registered: ‎10-11-2012
Message 4 of 7 (264 Views)

Re: need help with plastic part

04-15-2013 07:12 AM in reply to: mikejones

Hi Mike

 

I look forward to viewing your part...

 

Regards

 

Sam

Distinguished Mentor
rdyson
Posts: 897
Registered: ‎04-11-2005
Message 5 of 7 (243 Views)

Re: need help with plastic part

04-15-2013 08:47 AM in reply to: sam__gleeson

See attached, let me know if you can't figure out what I did.

Valued Contributor
mikejones
Posts: 82
Registered: ‎10-09-2007
Message 6 of 7 (217 Views)

Re: need help with plastic part

04-15-2013 12:46 PM in reply to: rdyson

Hi. Here's my version of the same part as promised.

Mike

Autodesk Certified Professional
Active Contributor
sam__gleeson
Posts: 46
Registered: ‎10-11-2012
Message 7 of 7 (195 Views)

Re: need help with plastic part

04-16-2013 12:59 AM in reply to: sam__gleeson

Hi Mike & Rdyson

Thank you

Sam

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.