Inventor General Discussion

Inventor General Discussion

Reply
Active Member
bzia
Posts: 6
Registered: ‎03-29-2012
Message 1 of 6 (336 Views)
Accepted Solution

need help modeling a fly wheel

336 Views, 5 Replies
05-03-2012 02:16 PM

I am new to Autodesk inventor. Can someone please help me in making different radii of highlighted portion, Thank you.Untitled.jpg

 

 

 

\

 

 

Hi bzia,

 

Here are a few hints on starting this part. Remember to keep your sketches simple.

http://inventortrenches.blogspot.com/2011/03/inventor-101-simple-fully-constrained.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

http://inventortrenches.blogspot.com/2011/03/modeling-practice-drawings-for-inventor.html

 

Autodesk Inventor FlyWheel_1.PNG

Autodesk Inventor FlyWheel_2.PNG

Autodesk Inventor FlyWheel_4.PNG

Autodesk Inventor FlyWheel_3.PNG

 

and now apply fillet features ... then pattern the cut and fillets

*Expert Elite*
CelticDesignServices
Posts: 518
Registered: ‎11-29-2011
Message 2 of 6 (331 Views)

Re: need help modeling a fly wheel

05-03-2012 02:39 PM in reply to: bzia

bzia,

 

I'm assuming you mean the "R7" and the "R12" radii for that cutout?

Simply select the Fillet command and input the first size, select the edges, then select the "click to add" text in the menu and input the other radius size and then select those edges, hit Apply when done.

 

fillet.JPG

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
Employee
udayag
Posts: 90
Registered: ‎06-07-2010
Message 3 of 6 (319 Views)

Re: need help modeling a fly wheel

05-03-2012 04:46 PM in reply to: bzia

Here's an attmpt. The file was created in Inventor 2012. Please move the End of Part marker down, if necessary.

Udaya Gunasena
Fusion Development
Autodesk
*Expert Elite*
Curtis_Waguespack
Posts: 3,000
Registered: ‎03-08-2006
Message 4 of 6 (307 Views)

Re: need help modeling a fly wheel

05-03-2012 06:00 PM in reply to: bzia

 

Hi bzia,

 

Here are a few hints on starting this part. Remember to keep your sketches simple.

http://inventortrenches.blogspot.com/2011/03/inventor-101-simple-fully-constrained.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

http://inventortrenches.blogspot.com/2011/03/modeling-practice-drawings-for-inventor.html

 

Autodesk Inventor FlyWheel_1.PNG

Autodesk Inventor FlyWheel_2.PNG

Autodesk Inventor FlyWheel_4.PNG

Autodesk Inventor FlyWheel_3.PNG

 

and now apply fillet features ... then pattern the cut and fillets



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Active Member
bzia
Posts: 6
Registered: ‎03-29-2012
Message 5 of 6 (297 Views)

Re: need help modeling a fly wheel

05-03-2012 06:48 PM in reply to: udayag

Thanks, but your file is not opening. I am getting the following error:

 

   Error in reading RSe stream

Active Member
bzia
Posts: 6
Registered: ‎03-29-2012
Message 6 of 6 (282 Views)

Re: need help modeling a fly wheel

05-03-2012 08:22 PM in reply to: Curtis_Waguespack

Thank you, your solution was very helpful.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.