Inventor General Discussion

Inventor General Discussion

Reply
Mentor
akosi
Posts: 258
Registered: ‎09-17-2010
Message 1 of 7 (492 Views)
Accepted Solution

multiple sheets for idw

492 Views, 6 Replies
10-01-2010 06:01 AM

hi,

 

i have an assembly with 100+ parts that i have to show in my parts list.

my question is :

how can i add identical sheets showing identical view of the assembly but the ist page will show the first 50 parts and the second page will show the rest of the part list?

 

thanks

inventor 2011

vault 2011

Copy the view from Sheet 1 to Sheet 2.

Place a parts list on each sheet and edit to turn off visibility.

 

Mike

 

Mentor
Mike_Maenpaa
Posts: 183
Registered: ‎09-23-2008
Message 2 of 7 (485 Views)

Re: multiple sheets for idw

10-01-2010 06:13 AM in reply to: akosi

Copy the view from Sheet 1 to Sheet 2.

Place a parts list on each sheet and edit to turn off visibility.

 

Mike

 

Mentor
akosi
Posts: 258
Registered: ‎09-17-2010
Message 3 of 7 (478 Views)

Re: multiple sheets for idw

10-01-2010 06:35 AM in reply to: Mike_Maenpaa

awsome!!!  :smileyhappy: ... thanks

Active Member
mirzanasrullah
Posts: 8
Registered: ‎06-13-2006
Message 4 of 7 (229 Views)

Re: multiple sheets for idw

03-30-2013 07:40 AM in reply to: akosi

Dear All,

 

Please i want to know that - Can it be possible to make the single template or prompted values for my multiple sheet.

 

this is to avoid the time to complete each sheet for prompted text and to make unified sheet for one perticular part or assembly.

 

Thank you.

 

Nasrullah Baig Mirza,
Mechanical Design Engineer,
Active Member
mirzanasrullah
Posts: 8
Registered: ‎06-13-2006
Message 5 of 7 (161 Views)

Re: multiple sheets for idw

05-13-2013 05:59 AM in reply to: mirzanasrullah

Please help for the above query... Still waiting...

 

Nasrullah Baig Mirza,
Mechanical Design Engineer,
Valued Contributor
mikejones
Posts: 82
Registered: ‎10-09-2007
Message 6 of 7 (158 Views)

Re: multiple sheets for idw

05-13-2013 06:07 AM in reply to: mirzanasrullah

Try changing the prompted entries in your title block definition to use iProperties or custom iProperties instead. This way the iProperties will appear on all sheets automatically.

 

Mike

Autodesk Certified Professional
*Expert Elite*
sam_m
Posts: 638
Registered: ‎11-05-2003
Message 7 of 7 (153 Views)

Re: multiple sheets for idw

05-13-2013 06:14 AM in reply to: mirzanasrullah

toggling the visibility for each line-item is kinda crazy.  A better way would be to use the filter option to, erm, filter the parts lists to the first x components and then copy the sheet and change the filter range to start with the next item to the end.

 

As for setting up a template to have this already setup, dunno if it's needed as it's only a 5second job to assign a filter (compared to the time for toggling half the parts list visible or not).

 

filter1.png 

 

as for a separate sheet for each part, etc.  just use 1 idw for each part or assembly, as it's really intended to be used...

----------
Please mark this response as "Accept as Solution" if it answers your question...
but please understand that the solution may not be the answer you're wanting to hear...

If you have found any post to be helpful, even if it's not a direct solution, then please provide that author kudos - spread that love :smileyvery-happy:

Lithium - helping nntp users with mania, depression and headaches
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.