Inventor General Discussion

Inventor General Discussion

Reply
Contributor
richweiss1513
Posts: 13
Registered: ‎05-02-2012
Message 1 of 5 (103 Views)
Accepted Solution

Movement question

103 Views, 4 Replies
05-08-2012 07:57 AM

I have an assembly that has a part I would like to be able to move using a driven constraint.  The part is a pin that I would like to follow an odd shaped slot.

How would I go about doing that?

Any suggestions?

 

Thanks

Rich

Transistional Constraint.

Angle or Offset Mate constraint to drive.

 

or

Use appropriate Dynamic Simulation joints if you have Inventor Professional.

 

Attach your assembly here.

*Expert Elite*
JDMather
Posts: 28,263
Registered: ‎04-20-2006
Message 2 of 5 (101 Views)

Re: Movement question

05-08-2012 07:59 AM in reply to: richweiss1513

Transistional Constraint.

Angle or Offset Mate constraint to drive.

 

or

Use appropriate Dynamic Simulation joints if you have Inventor Professional.

 

Attach your assembly here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
richweiss1513
Posts: 13
Registered: ‎05-02-2012
Message 3 of 5 (97 Views)

Re: Movement question

05-08-2012 08:03 AM in reply to: richweiss1513
Richard Weiss T. G. Faria Corp 385 Norwich-New London Tpke. PO Box 983 Uncasville, CT 06382 860-848-9271 ext.1243 richw@faria-instruments.com
*Expert Elite*
JDMather
Posts: 28,263
Registered: ‎04-20-2006
Message 4 of 5 (89 Views)

Re: Movement question

05-08-2012 08:19 AM in reply to: richweiss1513

Huh?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
richweiss1513
Posts: 13
Registered: ‎05-02-2012
Message 5 of 5 (66 Views)

Re: Movement question

05-10-2012 10:17 AM in reply to: richweiss1513

Thanks,

This worked well it solved my problem.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.