looking for that print manager..???

[Anonymous]

I was told of a vba that would allow you set up drawing before hand, to later be able to print ALL at one time.

[Anonymous]

I use Kent's KwikPrints and it works very well for
me...

href="http://www.mymcad.com/KWiK/iCode/icode.htm">http://www.mymcad.com/KWiK/iCode/icode.htm

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"fritsche" <
href="mailto:chris@creation3d.net">chris@creation3d.net> wrote in
message
href="news:f192751.-1@WebX.maYIadrTaRb">news:f192751.-1@WebX.maYIadrTaRb...

I
was told of a vba that would allow you set up drawing before hand, to later be
able to print ALL at one time.

[Anonymous]

once i installit how do I get it to work?

[Anonymous]

1. Once installed Open Inventor and from the
pulldown menu's select: Tools -> Kwik Print Saved Print Settings ->
KwikPrints Settup.

2. The KwikPrints Setup dialog box will
appear.  From here you can set up to 4 Command Buttons that will always
print to those settings.  You will need to Select a Printer Button, then
set up your options for that button.  Once the settings are set select
Apply.  A command button will appear on your Standard Toolbar, it will look
like a printer with a corresponding number.  You might have to go to your
Customize window and move the buttons around to your spcifications. 

3.  You might have to restart your computer to
get the settings straight.

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"fritsche" <
href="mailto:chris@creation3d.net">chris@creation3d.net> wrote in
message
href="news:f192751.1@WebX.maYIadrTaRb">news:f192751.1@WebX.maYIadrTaRb...

once
i installit how do I get it to work?

[Anonymous]

Thanks Joe. I missed that the question was about KWiKPrints Good Instructions 8^)

You really shouldn't have to reboot, but to get tooltips and things like that working
right you will probably have to shutdown Inventor and then restart it.

--
Kent
Assistant Moderator
Autodesk Discussion Forum Moderator Program


"Joe Bartels" wrote in message
news:2A0B133E9201D6CD6E613926A684A122@in.WebX.maYIadrTaRb...
> 1. Once installed Open Inventor and from the pulldown menu's select: Tools -> Kwik Print
Saved Print Settings -> KwikPrints Settup.

> "fritsche" wrote in message news:f192751.1@WebX.maYIadrTaRb...
> once i installit how do I get it to work?

[Anonymous]

i did that, however it is still not showing up in the tools pull down..???? I installed it in the macros file, is that the correct place?

[Anonymous]

I will have to say I have same problem with R6. But
if I open R7 the options appear.

Matt

[Anonymous]

Is this in R7?
If not try editing the .reg file in notepad and removing this line.

"SupportedSoftwareVersionGreaterThan"="6.."

Then save it and double click on it to run it.

It seems like it should work in R6 with that line but ??

--
Kent
Assistant Moderator
Autodesk Discussion Forum Moderator Program


"fritsche" wrote in message news:f192751.4@WebX.maYIadrTaRb...
> did that, however it is still not showing up in the tools pull down..???? I installed it
in the macros file, is that the correct place?

[Anonymous]

No dice. It still refuses to show up in R6.

Thanks,
Matt

[Anonymous]

that did not work. I have IV7 at home and forgot to try, but at work I can only use IV6 and it doesn't work

[Anonymous]

I will forward this home where I still have R6 and see if I can get it to work. I can't
think of any reason it shouldn't but ??

--
Kent
Assistant Moderator
Autodesk Discussion Forum Moderator Program


"fritsche" wrote in message news:f192751.8@WebX.maYIadrTaRb...
> that did not work. I have IV7 at home and forgot to try, but at work I can only use IV6
and it doesn't work