Inventor General Discussion

Reply
Member
topod
Posts: 3
Registered: ‎11-18-2012
Message 1 of 6 (375 Views)

Label 3D part

375 Views, 5 Replies
11-18-2012 07:34 AM

Anyone can tell me how to label a 3d model if that`s possible at all? I am due for an interview and they`ll give me a part to 3d model it and then label it. Now I am not sure if they want me to label the part after I have placed it into the drawing sheet with different views(that`s simple) or they want me to label the actual 3d part without creating a drawing.

Thank you. 

*Expert Elite*
blair
Posts: 4,215
Registered: ‎11-13-2006
Message 2 of 6 (362 Views)

Re: Label 3D part

11-18-2012 04:38 PM in reply to: topod

Label for 3D part, either Decal or Emboss.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 340.52
SpacePilot Pro 3.17.7, 6.17., 4.11
Delta Tau Chi ΔΤΧ
Member
topod
Posts: 3
Registered: ‎11-18-2012
Message 3 of 6 (339 Views)

Re: Label 3D part

11-19-2012 04:53 AM in reply to: topod
Thank you.
If anyone could upload a sample image how it should look would be much appreciated.
Thanks.
*Expert Elite*
mcgyvr
Posts: 7,062
Registered: ‎12-01-2004
Message 4 of 6 (328 Views)

Re: Label 3D part

11-19-2012 05:36 AM in reply to: topod

define "label"

Maybe they mean "to dimension"

 

I suspect you simply need to model the part and then "dimension" the part in a drawing.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Distinguished Contributor
lama
Posts: 121
Registered: ‎09-06-2006
Message 5 of 6 (322 Views)

Re: Label 3D part

11-19-2012 05:47 AM in reply to: mcgyvr

I too find the term "label" unclear.

 

Could be decal/embossed with part#, logo, etc...

Could be dimension and/or place parts list in .idw/.dwg environment

Could be to change the Features to have descriptive names

Could be using Publisher or similar to dimension/bubble

Larry Marshall
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
Member
topod
Posts: 3
Registered: ‎11-18-2012
Message 6 of 6 (296 Views)

Re: Label 3D part

11-19-2012 12:57 PM in reply to: topod

I find the term labeling unclear as well, maybe they don`t want to say it precisely and they will let me know on the interview.Anyway thank you guys for the responses.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.