Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Would you be interested in trying a Insert and fix that is a Addin. I haven't added it to
the web site yet ....... Two people I know of have tried it and for one it runs, and the
other it doesn't. I guess actually three people have tried it... it works for me on two
machines 8^)
The Addin has a couple of advantages, mainly you can reorder things before inserting them.
Since we lost Browser reorder I have found this is a good alternative.
I would be interested in getting some more feedback if it works for people or not.
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Kirk A." wrote in message
> When I run the macro, I get "Run-time error '91': Object variable or With
> block variable not set."
You have to have an assembly open in which to insert the files. Kent
**should* have had some error checking in there to warn the user of
this... Sorry Kent, I don't get to point out your mistakes very
often....
--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
Watch out Philly, Tampa's on a roll...
-----------------------------------------
Really, you are missing lots of opportunities then
Still if anyone is interested in trying a Addin Insert and fix I would like some feedback.
.... and yes it warns you if you don't have a assembly open 8^)
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Sean Dotson" wrote in message
Sorry Kent, I don't get to point out your mistakes very
> often....
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> Watch out Philly, Tampa's on a roll...
> -----------------------------------------
>
>
"Sean Dotson" wrote in message
news:53F28D2EAE22EF297A0F8C400FEE607A@in.WebX.maYIadrTaRb...
> You have to have an assembly open in which to insert the files. Kent
> **should* have had some error checking in there to warn the user of
> this... Sorry Kent, I don't get to point out your mistakes very
> often....
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> Watch out Philly, Tampa's on a roll...
> -----------------------------------------
>
>
Also get Charles' Mr. Macro for ivb files. It makes running non add-ins a
breeze..
--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
Watch out Philly, Tampa's on a roll...
-----------------------------------------
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")