Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I've at last got around to installing IV10 and SP1 and SP2. However using the stock Standard.idw with no macros or extra Add-ins if I save a idw the Part Number iProp is not updated.
What is going on here??? Glad I've not actually started using 10 yet, found this out tonight after trying a few things out.
Any comments Autodesk? I'm creating a brand new drawing from the Standard.idw shipped with IV10.
wrote in message news:5036026@discussion.autodesk.com...
I've at last got around to installing IV10 and SP1 and SP2. However using
the stock Standard.idw with no macros or extra Add-ins if I save a idw the
Part Number iProp is not updated.
What is going on here??? Glad I've not actually started using 10 yet, found
this out tonight after trying a few things out.
Any comments Autodesk? I'm creating a brand new drawing from the
Standard.idw shipped with IV10.
Well, I quickly check and if I create new drawing, add title block with
(drawing's) PART NUMBER in it and save the drawing, it defaulted to the
drawing name. Tha's the default behavior for all IV documents. What exactly
are steps you are using?
Jirka
wrote in message news:5036026@discussion.autodesk.com...
I've at last got around to installing IV10 and SP1 and SP2. However using
the stock Standard.idw with no macros or extra Add-ins if I save a idw the
Part Number iProp is not updated.
What is going on here??? Glad I've not actually started using 10 yet, found
this out tonight after trying a few things out.
Any comments Autodesk? I'm creating a brand new drawing from the
Standard.idw shipped with IV10.
I create a new drawing using the Standard.idw template shipped with IV10.
Then save this as Drawing1. At this point the Part Number field in the
Title Block is blank. Close the drawing and re-open and it is still blank.
I will try the File > New while holding Ctrl and Shift method to create a
completely blank drawing when back at home (haven't installed IV10 at work
yet) and see if that is different. IV10 is installed on a completely fresh
install of Windows2000 with SP4 slipstreamed. I installed IV10 and
authorised it and then installed SP1 and SP2 but ran IV between installing
SPs. I haven't got the Content Centre installed and have no other Add-ins
other than the Autodesk supplied ones and no macros.
"Jirka Stejskal (Autodesk)" wrote in message
news:5036467@discussion.autodesk.com...
Well, I quickly check and if I create new drawing, add title block with
(drawing's) PART NUMBER in it and save the drawing, it defaulted to the
drawing name. Tha's the default behavior for all IV documents. What exactly
are steps you are using?
Jirka
wrote in message news:5036026@discussion.autodesk.com...
I've at last got around to installing IV10 and SP1 and SP2. However using
the stock Standard.idw with no macros or extra Add-ins if I save a idw the
Part Number iProp is not updated.
What is going on here??? Glad I've not actually started using 10 yet, found
this out tonight after trying a few things out.
Any comments Autodesk? I'm creating a brand new drawing from the
Standard.idw shipped with IV10.
I created a drawing using Ctrl Shift and New and the Part Number iProp was filled in correctly. I didn't actually create a title block with the Part Number iProp, just looked at the iProperties of the drawing and the Part Number was filled in correctly in the Project tab.
Could it be connected with not having the Content Centre installed?
Just uninstalled IV10 and reinstalled without the Content Centre. Out of the box and with SP1 the Part Number iProp works as it always did and the title block shows the Part Number even with my drawing template. I then installed SP2 and it's broken again!
I guess another uninstall and reinstall back to SP1 is needed.
Rob,
thanks for reporting this, I'll pass this to our QA and development,
something maybe in SP2.
Jirka
wrote in message news:5036948@discussion.autodesk.com...
Just uninstalled IV10 and reinstalled without the Content Centre. Out of
the box and with SP1 the Part Number iProp works as it always did and the
title block shows the Part Number even with my drawing template. I then
installed SP2 and it's broken again!
I guess another uninstall and reinstall back to SP1 is needed.
Thanks Jirka,
I uninstalled and installed back to SP1 last night and the Part Number was
working again, so, for me at least it's SP2 causing the problem.
"Jirka Stejskal (Autodesk)" wrote in message
news:5037690@discussion.autodesk.com...
Rob,
thanks for reporting this, I'll pass this to our QA and development,
something maybe in SP2.
Jirka
wrote in message news:5036948@discussion.autodesk.com...
Just uninstalled IV10 and reinstalled without the Content Centre. Out of
the box and with SP1 the Part Number iProp works as it always did and the
title block shows the Part Number even with my drawing template. I then
installed SP2 and it's broken again!
I guess another uninstall and reinstall back to SP1 is needed.
It certainly is always! This is one of those nice examples of something that worked perfectly well, at least since 5.3 getting broken in a SP and costing you time trying to fix it. I always assume it is something I have done.......
wrote in message news:5037794@discussion.autodesk.com...
It certainly is always! This is one of those nice examples of something
that worked perfectly well, at least since 5.3 getting broken in a SP and
costing you time trying to fix it. I always assume it is something I have
done.......
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")