Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Having noticed that an Excel Bend Table has been provided for use with Sheet
Metal parts, I was wondering if the supplied table is "ready to use" as is,
or must I make modifications to the table?
If modifications are needed, typically, what changes are usually made to the
bend table, and for what purposes?
the bend table is ment to be modified to match your companies bend
allowances and bend radius. For example, we use a lot of 18ga CRS (.047)
they don't show a .047 sheet thickness so I added a new table for the for
.047 thickness and under the .031 bending radii I set the value to .078 for
the 90 degree bend. Also for the .060 sheet thickness, .031 bending radii we
found that for a 90 degree bend we found a bend allowance of .094 worked
better than the .109457 value found in the table so I modified that table to
match our companies tried and true bend allowances.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")