Inventor General Discussion

Inventor General Discussion

Posts: 15
Registered: ‎05-17-2011
Message 1 of 3 (281 Views)

Inventor - Swapping Title Block & Format

281 Views, 2 Replies
05-02-2012 09:47 AM

I have a completed drawing that needs to be with a different title block and maybe page size.  Is there a way to swap this out without having to recreate the drawing on the desired format? 

*Expert Elite*
Posts: 3,219
Registered: ‎04-06-2010
Message 2 of 3 (278 Views)

Re: Inventor - Swapping Title Block & Format

05-02-2012 10:09 AM in reply to: DanMcManus2492

If the desired titleblock is already in the drawing it's a piece of cake.  If not,... a slightly smaller piece of cake.


If it is in there, look at each sheet in the model tree and find the titleblock listed.



Right click on the titleblock and select delete.  Now go above to Drawing resources, find the new titleblock, right click and select insert.


If it is not already there, open a drawing that has the titleblock you want.  Find it in the drawing resources as shown above, right click and copy to clipboard.  Now go back to the drawing you want in ti live in, right click on titleblocks in the Drawing Resources and paste.  It is now available for insertion.




Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Thank you! :smileyhappy:


*Expert Elite*
Posts: 2,890
Registered: ‎03-08-2006
Message 3 of 3 (276 Views)

Re: Inventor - Swapping Title Block & Format

05-02-2012 10:13 AM in reply to: DanMcManus2492

Hi DanMcManus2492, 


And if you end up needing to change the page size, simply right click on the Sheet node in the browser (Sheet:1for example) and choose Edit Sheet.


I hope this helps.
Best of luck to you in all of your Inventor pursuits,

  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.