Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
AdiStratulat
Posts: 36
Registered: ‎09-06-2011
Message 1 of 4 (673 Views)

Inventor "Mold design" module - additional documentation...!?

673 Views, 3 Replies
01-03-2012 09:48 AM

Hi everyone,

 

I am looking for some detailed documentation about "mold design" module of Autodesk 2011 (and 2012..  I think is the same).

I have the book "Mastering Autodesk Inventor 2011" but it has only 12 pages about this (!)



Are the "built-in" tutorials good enough to cover all the aspects?

Please, if anybody know about some books or more tutorials, let me know (this could be useful for many people, I think).

 

The same issue about "Autodesk Moldflow Insight" software.



Thanks,



Adrian Stratulat
*Expert Elite*
Mark_Flayler
Posts: 1,467
Registered: ‎07-30-2007
Message 2 of 4 (668 Views)

Re: Inventor "Mold design" module - additional documentation...!?

01-03-2012 09:55 AM in reply to: AdiStratulat

There is an Inventor Tooling book made just for this, but you usually have to go through your reseller/VAR to get it.  I have taught it a couple times, good book on the commands, but not the best on actual industry usage.

 

http://imaginit.com/training/in-person-classes/course-descriptions/manufacturing/Autodesk-Inventor-T...

 

There is a Moldflow Advisor book we also use for training and this one is available to the public.

 

http://ascented.com/courseware-solutions/autodesk/courseware/Autodesk-Moldflow.aspx

Mark Flayler - Senior Application Engineer
IMAGINiT's Manufacturing Solutions Blog:
http://blogs.rand.com/manufacturing/
*Expert Elite*
JDMather
Posts: 26,864
Registered: ‎04-20-2006
Message 3 of 4 (662 Views)

Re: Inventor "Mold design" module - additional documentation...!?

01-03-2012 09:59 AM in reply to: AdiStratulat

AdiStratulat wrote:



Are the "built-in" tutorials good enough to cover all the aspects?




Students can download Inventor Professional with Inventor Tooling for free from http://www.autodesk.com/edcommunity so you can check out the built-in tutorials yourself.
Also the AU 2011 on-line classes are now avialable at http://au.autodesk.com

 

There is one tutorial in my signature (see the vacuum tutorial).

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
AdiStratulat
Posts: 36
Registered: ‎09-06-2011
Message 4 of 4 (642 Views)

Re: Inventor "Mold design" module - additional documentation...!?

01-03-2012 11:23 PM in reply to: JDMather

Thanks for the advice.

Unfortunately I couldn't find your class on AU.

In fact, there are a lot of troubles on AU2011 site!

For example, I cannot download screencast for most of class, just watch online(just few only!), at low resolution only, etc

Maybe smb from Autodesk will take a look there and fix the issues.

 

Adrian Stratulat
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.