Thank you Ryan for making this effort!
90° (and 82°) will be fine by me.
Routines like making standard holes, springs etc. are the things I really
want to see in Inventor. I guess I could use MDT ........ 😉
Christian.
"Gary Cook" schreef in bericht
news:0A6692E3B82D7B8F67EDE37A45DED324@in.WebX.maYIadrTaRb...
> 90° countersink is metric standard, 82° is imperial csink standard.
> Standard drill point angle is 118° (unless you try to sharpen them
yourself
> :).
>
> Gary
>
> "Ryan Small" wrote in message
> news:B4BB9E37EDA13B78C379DAB2BF1E86E7@in.WebX.maYIadrTaRb...
> > Many of you on the newsgroup are familiar with the free standard holes
> > utility available at www.mymcad.com
> >
> > We are in the process of updating it for Inventor 8, and now with the
> > redesigned hole dialog we are able to accomodate for countersink angle
and
> > drill-point angle and have therefore added these additional columns to
the
> > spreadsheet "holes.xls" that comes with the utility. Should these
values
> be
> > left blank in the spreadsheet to be filled out by each user or is there
a
> > consensus as to what we should put for these values?
> >
> > If desired, you can email me directly.
> >
> > --
> > ----------
> > Ryan Small
> > Solid Caddgroup Inc.
> > Authorized Autodesk Systems Center
> > Burlington, Ontario, Canada
> > Ph:905-331-9670 Fx:905-331-7280
> > http://www.solidcadcam.com
> > ryan@solidcadcam.com
> >
> >
>
>