Inventor.exe is not currently registered

[kkelly2]

I try installing Inventor 6 on my XP PRO machine and I get the following error message: "Inventor.exe is not currently registered and did not correctly re-register on start up. This is probably because you do not have enough access rights (e.g. you are a Restricted User). Ask and Administrator or Standard User to re-run the program for you."....

I am a Administrator on the machine. Please any thoughts....

[Anonymous]

If you have an older version of IV installed, you must reboot between using
5.3 and 6 and vice versa.

--
Cory McConnell
BJ Pipeline Inspection
"kkelly2" wrote in message
news:f1240a5.-1@WebX.maYIadrTaRb...
> I try installing Inventor 6 on my XP PRO machine and I get the following
error message: "Inventor.exe is not currently registered and did not
correctly re-register on start up. This is probably because you do not have
enough access rights (e.g. you are a Restricted User). Ask and Administrator
or Standard User to re-run the program for you."....
> I am a Administrator on the machine. Please any thoughts....
>
>

[Anonymous]

logging in and out seems to work also..a bit quicker..

--
____________________
Sean Dotson
http://www.sdotson.com
...sleep is for the weak...
----
"Cory McConnell" wrote in message
news:AC759A21A9616EAAD421D647210FC8E8@in.WebX.maYIadrTaRb...
> If you have an older version of IV installed, you must reboot between
using
> 5.3 and 6 and vice versa.
>
> --
> Cory McConnell
> BJ Pipeline Inspection
> "kkelly2" wrote in message
> news:f1240a5.-1@WebX.maYIadrTaRb...
> > I try installing Inventor 6 on my XP PRO machine and I get the following
> error message: "Inventor.exe is not currently registered and did not
> correctly re-register on start up. This is probably because you do not
have
> enough access rights (e.g. you are a Restricted User). Ask and
Administrator
> or Standard User to re-run the program for you."....
> > I am a Administrator on the machine. Please any thoughts....
> >
> >
>
>

[kkelly2]

all versions have been removed from the machine and register clean... Any other thoughts. I remvoed Norton and Zone alarm and reinstalled...no luck.

[Anonymous]

You might try a search on EULA in the NG, I
think, there were some post about needing to copy the EULA directory from the CD
in some cases. No guarantees, though, that it will fit your
problem.

~Larry

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"kkelly2" <
href="mailto:kkelly@performanceplastics.net">kkelly@performanceplastics.net>
wrote in message
href="news:f1240a5.-1@WebX.maYIadrTaRb">news:f1240a5.-1@WebX.maYIadrTaRb...

I
try installing Inventor 6 on my XP PRO machine and I get the following error
message: "Inventor.exe is not currently registered and did not correctly
re-register on start up. This is probably because you do not have enough
access rights (e.g. you are a Restricted User). Ask and Administrator or
Standard User to re-run the program for you."....

I am a Administrator on the machine. Please any
thoughts....

[Anonymous]

oops sorry I was thinking of another error (guess I should read the post
better)

--
____________________
Sean Dotson
http://www.sdotson.com
...sleep is for the weak...
----
"Sean Dotson" wrote in message
news:F9997431D0B9DB7619E9CEB68AFCD961@in.WebX.maYIadrTaRb...
> logging in and out seems to work also..a bit quicker..
>
> --
> ____________________
> Sean Dotson
> http://www.sdotson.com
> ...sleep is for the weak...
> ----
> "Cory McConnell" wrote in message
> news:AC759A21A9616EAAD421D647210FC8E8@in.WebX.maYIadrTaRb...
> > If you have an older version of IV installed, you must reboot between
> using
> > 5.3 and 6 and vice versa.
> >
> > --
> > Cory McConnell
> > BJ Pipeline Inspection
> > "kkelly2" wrote in message
> > news:f1240a5.-1@WebX.maYIadrTaRb...
> > > I try installing Inventor 6 on my XP PRO machine and I get the
following
> > error message: "Inventor.exe is not currently registered and did not
> > correctly re-register on start up. This is probably because you do not
> have
> > enough access rights (e.g. you are a Restricted User). Ask and
> Administrator
> > or Standard User to re-run the program for you."....
> > > I am a Administrator on the machine. Please any thoughts....
> > >
> > >
> >
> >
>
>

[steeleman2]

I found this which I thought was helpful.  It worked for me anyway.

http://www.cadforum.cz/cadforum_en/error-inventor-exe-is-not-currently-registered-tip7261

Good Luck

[Dennis_Jeffrey]

This thread is over 8 years old.