Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
zdhrichard
Posts: 128
Registered: ‎05-03-2011
Message 1 of 7 (3,296 Views)
Accepted Solution

Inventor 2013 open *.prt (Pro/E file) issue

3296 Views, 6 Replies
10-09-2012 11:40 AM

Does any body know why Inventor 2013 cannot open an *.prt (Pro/E) file as attached?

 

I can open it in Inventor 2009, but when I tried to open it in Inventor 2013, it said "Unable to convert Pro/ENGINEER or Creo Parametric file to Inventor file."

 

 

Rich

Autodesk Inventor Professional 2014 (64 Bit Edition)
Build: 246, Release 2014 SP2 Update 2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory

First thing I noticed is that there was a space in the filename. Pro/E doesn't allow spaces in filenames?

After removing the space - I was able to open the file in Creo 2.0

 

Edit - I was able to open the file in Inventor 2013.

Distinguished Contributor
R.Corriveau
Posts: 2,163
Registered: ‎10-10-2005
Message 2 of 7 (3,282 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:23 PM in reply to: zdhrichard

Opened as a Solidworks file in Inventor 2012. File is blank.

Distinguished Mentor
Distinguished Mentor
wh
Posts: 592
Registered: ‎12-27-2003
Message 3 of 7 (3,277 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:32 PM in reply to: R.Corriveau

Opens well  as Pro/E-PRT in 2010, too.

2011 and newer versions refuse.

 

Comments from ADesk are welcome.

Walter

*Expert Elite*
JDMather
Posts: 28,254
Registered: ‎04-20-2006
Message 4 of 7 (3,269 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:43 PM in reply to: zdhrichard

First thing I noticed is that there was a space in the filename. Pro/E doesn't allow spaces in filenames?

After removing the space - I was able to open the file in Creo 2.0

 

Edit - I was able to open the file in Inventor 2013.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Distinguished Mentor
Distinguished Mentor
wh
Posts: 592
Registered: ‎12-27-2003
Message 5 of 7 (3,265 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:50 PM in reply to: JDMather

Interesting; Jeffrey.

Renaming to RPEE_LEN.prt did it here, too.

 

Thanks

Distinguished Mentor
john.retzlaff
Posts: 947
Registered: ‎11-03-2003
Message 6 of 7 (3,264 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:51 PM in reply to: JDMather

Opens here too, after taking the space out of the file name.Inventor 2013

 


Dell Precision T3500
Windows 7 64-bit
12GB RAM
dual NVidia Quadro 2000
Driver 297.03

John Retzlaff
Distinguished Contributor
zdhrichard
Posts: 128
Registered: ‎05-03-2011
Message 7 of 7 (3,256 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:57 PM in reply to: john.retzlaff

Thanks lot, Guys!

 

After removing space, it works.

 

Inventor 2009 accept space, 2013 does not.

Rich

Autodesk Inventor Professional 2014 (64 Bit Edition)
Build: 246, Release 2014 SP2 Update 2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.