Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
zdhrichard
Posts: 128
Registered: ‎05-03-2011
Message 1 of 7 (3,196 Views)
Accepted Solution

Inventor 2013 open *.prt (Pro/E file) issue

3196 Views, 6 Replies
10-09-2012 11:40 AM

Does any body know why Inventor 2013 cannot open an *.prt (Pro/E) file as attached?

 

I can open it in Inventor 2009, but when I tried to open it in Inventor 2013, it said "Unable to convert Pro/ENGINEER or Creo Parametric file to Inventor file."

 

 

Rich

Autodesk Inventor Professional 2014 (64 Bit Edition)
Build: 246, Release 2014 SP2 Update 2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory

First thing I noticed is that there was a space in the filename. Pro/E doesn't allow spaces in filenames?

After removing the space - I was able to open the file in Creo 2.0

 

Edit - I was able to open the file in Inventor 2013.

Distinguished Contributor
R.Corriveau
Posts: 2,163
Registered: ‎10-10-2005
Message 2 of 7 (3,182 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:23 PM in reply to: zdhrichard

Opened as a Solidworks file in Inventor 2012. File is blank.

Distinguished Mentor
Distinguished Mentor
wh
Posts: 553
Registered: ‎12-27-2003
Message 3 of 7 (3,177 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:32 PM in reply to: R.Corriveau

Opens well  as Pro/E-PRT in 2010, too.

2011 and newer versions refuse.

 

Comments from ADesk are welcome.

Walter

*Expert Elite*
JDMather
Posts: 28,008
Registered: ‎04-20-2006
Message 4 of 7 (3,169 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:43 PM in reply to: zdhrichard

First thing I noticed is that there was a space in the filename. Pro/E doesn't allow spaces in filenames?

After removing the space - I was able to open the file in Creo 2.0

 

Edit - I was able to open the file in Inventor 2013.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Distinguished Mentor
Distinguished Mentor
wh
Posts: 553
Registered: ‎12-27-2003
Message 5 of 7 (3,165 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:50 PM in reply to: JDMather

Interesting; Jeffrey.

Renaming to RPEE_LEN.prt did it here, too.

 

Thanks

Distinguished Mentor
john.retzlaff
Posts: 947
Registered: ‎11-03-2003
Message 6 of 7 (3,164 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:51 PM in reply to: JDMather

Opens here too, after taking the space out of the file name.Inventor 2013

 


Dell Precision T3500
Windows 7 64-bit
12GB RAM
dual NVidia Quadro 2000
Driver 297.03

John Retzlaff
Distinguished Contributor
zdhrichard
Posts: 128
Registered: ‎05-03-2011
Message 7 of 7 (3,156 Views)

Re: Inventor 2013 open *.prt (Pro/E file) issue

10-09-2012 01:57 PM in reply to: john.retzlaff

Thanks lot, Guys!

 

After removing space, it works.

 

Inventor 2009 accept space, 2013 does not.

Rich

Autodesk Inventor Professional 2014 (64 Bit Edition)
Build: 246, Release 2014 SP2 Update 2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!