Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
chrishutchinson6900
Posts: 30
Registered: ‎02-09-2011
Message 1 of 6 (1,306 Views)

Inventor 2013 Custom Materials Library Creation

1306 Views, 5 Replies
04-24-2012 12:45 PM

Is there a good source of material mechanical properties on the internet?  I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only.  I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.

 

Thanks,

Chris Hutchinson

*Expert Elite*
Curtis_Waguespack
Posts: 3,000
Registered: ‎03-08-2006
Message 2 of 6 (1,302 Views)

Re: Inventor 2013 Custom Materials Library Creation

04-24-2012 12:52 PM in reply to: chrishutchinson6900

Hi chrishutchinson6900,

 

Here is one source:

http://www.matweb.com/

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com




  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
mcgyvr
Posts: 7,248
Registered: ‎12-01-2004
Message 3 of 6 (1,294 Views)

Re: Inventor 2013 Custom Materials Library Creation

04-24-2012 01:30 PM in reply to: Curtis_Waguespack

matweb is the best I've found.. I use it all the time.. Be prepared to do some annoying math to get the correct units for Inventor.

I wish Inventor had more of a dropdown next to each value allowing you to enter any of the common unit formats and it would do the conversion for you..

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Valued Mentor
RayFeiler
Posts: 402
Registered: ‎10-07-2008
Message 4 of 6 (1,263 Views)

Re: Inventor 2013 Custom Materials Library Creation

04-25-2012 10:25 AM in reply to: mcgyvr

I use convert.exe

http://wscope.com/convert.htm

Product Design Suite Ultimate 2014 64-Bit

Sometimes you just need a good old reboot.
*Expert Elite*
mrattray
Posts: 2,538
Registered: ‎09-13-2011
Message 5 of 6 (1,258 Views)

Re: Inventor 2013 Custom Materials Library Creation

04-25-2012 10:43 AM in reply to: RayFeiler

I typicaly just use google. It's quite capable for most common math and conversions. I downloaded you converter though, it looks useful.

 

capture.jpg

 

capture.jpg

Mike (not Matt) Rattray

Valued Contributor
streharg
Posts: 69
Registered: ‎09-24-2012
Message 6 of 6 (990 Views)

Re: Inventor 2013 Custom Materials Library Creation

09-25-2012 03:13 AM in reply to: mcgyvr

For that purpose, you can change units for whole material library, then edit it, and change units back. You can do that in material library bottom left options.

 

Factory design suite 2013 premium
Some old workstation ...
Fancy HP LCD
:smileyhappy:
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.