Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
112 Posts
0 Kudos
Registered: ‎03-31-2011
Post 1 of 3

Inventor 2012 Pro - flat pattern for a solid

444 Views, 2 Replies
11-09-2012 01:58 PM

Is there a way, in an .idw (drawing file) to create a flat view (unrolled) of a cylindrical solid? NOT to be confused with sheet metal. This is from a solid .ipt. Either that or create a flat pattern of a solid cylinder that IS NOT SHEET METAL?

*Expert Elite*
472 Posts
244 Kudos
Registered: ‎03-07-2006
Post 2 of 3

Re: Inventor 2012 Pro - flat pattern for a solid

11-09-2012 07:40 PM in reply to: jrm_1971

ok well not too sure if this still falls within your allowable methodology, but maybe if you want to, you could derive the cylinder into a new sheet metal part, ipt (choose import as a surface). Then just thicken the outer skin, rip it and flatten it.

 

when you save the file, just call it the same file name as the main part but add a postfix to the name to indicate that it is related information.

best regards,
- Mark

(Kudo or Tag if Solved - it may help others)

PDSU 2015 Windows 8.1, 64bit.

*Expert Elite*
28,614 Posts
2,124 Kudos
Registered: ‎04-20-2006
Post 3 of 3

Re: Inventor 2012 Pro - flat pattern for a solid

11-10-2012 05:40 AM in reply to: jrm_1971

Sheet metal is just a term for a catagory of specialized tools.

 

Attach your file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post