Inventor 10 Performance

[ross.hollands]

Hi All,

I'm sure these questions have been covered elsewhere but I would appreciate any help you can offer.

Firstly we have the following set up:

3.2 Xeon Processor
3GB Memory
1 GB Network Connection
We are using Shared project over the network.

We are dealing with an assembly of approximately 2000 parts.

When we attempt to create an IDW or execute a trail in an IPN it does one of two things -

1. Takes forever to execute command
2. Crashes

We have done the 3GB switch but this has made no difference.

Any suggestions are appreciated.

Thanks

Ross

[Anonymous]

Graphic Card and driver?

You may want to review ___INVENTOR FAQ_ JULY 05, 2005__
from Kent Keller for additional trouble shooting suggestion.

Wolfe

wrote in message news:4912139@discussion.autodesk.com...
Hi All,

I'm sure these questions have been covered elsewhere but I would appreciate
any help you can offer.

Firstly we have the following set up:

3.2 Xeon Processor
3GB Memory
1 GB Network Connection
We are using Shared project over the network.

We are dealing with an assembly of approximately 2000 parts.

When we attempt to create an IDW or execute a trail in an IPN it does one of
two things -

1. Takes forever to execute command
2. Crashes

We have done the 3GB switch but this has made no difference.

Any suggestions are appreciated.

Thanks

Ross

[Anonymous]

Graphic Card and driver?

You may want to review ___INVENTOR FAQ_ JULY 05, 2005__
from Kent Keller for additional trouble shooting suggestion.

Wolfe

wrote in message news:4912139@discussion.autodesk.com...
Hi All,

I'm sure these questions have been covered elsewhere but I would appreciate
any help you can offer.

Firstly we have the following set up:

3.2 Xeon Processor
3GB Memory
1 GB Network Connection
We are using Shared project over the network.

We are dealing with an assembly of approximately 2000 parts.

When we attempt to create an IDW or execute a trail in an IPN it does one of
two things -

1. Takes forever to execute command
2. Crashes

We have done the 3GB switch but this has made no difference.

Any suggestions are appreciated.

Thanks

Ross

[ross.hollands]

Thanks for your help - where will I find this FAQ?

Regards

Ross

[Anonymous]

It is posted within this newsgroup.
make a search for Kent Keller,
or check for email posted July 05, 2005.

Wolfe

wrote in message news:4912188@discussion.autodesk.com...
Thanks for your help - where will I find this FAQ?

Regards

Ross

[Anonymous]

Hi Ross,

look for posts on the 25/07

Fabien.

a écrit dans le message de
news:4912188@discussion.autodesk.com...
Thanks for your help - where will I find this FAQ?

Regards

Ross

[Anonymous]

Ross,

Have a look at http://www.sdotson.com/docs/lap.dwf

Or let me have your E-mail addressed - make sure it is munged - and I'll send you the PDF version.


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs



wrote in message news:4912188@discussion.autodesk.com...
Thanks for your help - where will I find this FAQ?

Regards

Ross

[ross.hollands]

Thanks a lot to you all for your replies.

Duncan, can you email it to ross.hollands@dhi.co.uk

Many Thnaks

Regards

Ross

[Anonymous]

You have mail.

I'd suggest you munge your E-mail address, for example "ross DOTTY hollands HATTY dhi DOTTY co DOTTY uk" - see attached if you're
using OE6

It'll help to keep all those nasty little spam bots away


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs




wrote in message news:4912217@discussion.autodesk.com...
Thanks a lot to you all for your replies.

Duncan, can you email it to ross.hollands@dhi.co.uk

Many Thnaks

Regards

Ross

[ross.hollands]

Hi Duncan,

In my naivety I didn't know what munging was! Thanks!

Regards

Ross