Inventor General Discussion

Inventor General Discussion

Reply
Valued Mentor
meck
Posts: 360
Registered: ‎02-11-2004
Message 1 of 5 (344 Views)

Internet access is required to access the Help

344 Views, 4 Replies
04-26-2012 10:37 AM

Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.

Any suggestions? (I mean besides reloading 2012)

Mike Eck
Senior Designer/ CAD Programmer
Howden North America
Using Inventor 2013
Distinguished Contributor
dick_upton
Posts: 646
Registered: ‎02-25-2009
Message 2 of 5 (339 Views)

Re: Internet access is required to access the Help

04-26-2012 10:46 AM in reply to: meck

Is what you want here?

 

c:\Program Files\Autodesk\Inventor 2013\Help_Lite\

Valued Mentor
meck
Posts: 360
Registered: ‎02-11-2004
Message 3 of 5 (334 Views)

Re: Internet access is required to access the Help

04-26-2012 10:52 AM in reply to: dick_upton

I'm confused!

If you are asking me if there is a folder called Help_Lite under my Inventor 2013 folder the answer is no.

Otherwise what I want is to be able to access the help files online.

Mike Eck
Senior Designer/ CAD Programmer
Howden North America
Using Inventor 2013
*Expert Elite*
Curtis_Waguespack
Posts: 2,942
Registered: ‎03-08-2006
Message 4 of 5 (322 Views)

Re: Internet access is required to access the Help

04-26-2012 11:35 AM in reply to: meck

Hi meck,

I'm not sure what the problem is, but there is some information on setting it up to use the local help at this link (in case you don't get it sorted):

http://inventortrenches.blogspot.com/2011/04/where-are-inventor-2012-tutorial-and.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com




  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Valued Mentor
meck
Posts: 360
Registered: ‎02-11-2004
Message 5 of 5 (306 Views)

Re: Internet access is required to access the Help

04-26-2012 11:57 AM in reply to: Curtis_Waguespack

Thanks for the response.

I would rather have it online, but if it becomes a real issue I will download it 

Mike Eck
Senior Designer/ CAD Programmer
Howden North America
Using Inventor 2013
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.