Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
cadman777
Posts: 930
Registered: ‎06-30-2005
Message 1 of 20 (414 Views)

import iproperties of a part file into an assembly file

414 Views, 19 Replies
09-24-2012 07:02 AM

Will someone please tell me if I can do this, and how:

 

I want to import some of the iproperties of one ipt file into an iam file.

 

If that's possible, I forget how to do it.

... Chris
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
*Expert Elite*
Cadmanto
Posts: 3,356
Registered: ‎12-07-2011
Message 2 of 20 (406 Views)

Re: import iproperties of a part file into an assembly file

09-24-2012 07:48 AM in reply to: cadman777

Chris,

See if this link helps you.

http://cadsetterout.com/inventor-tutorials/how-copy-autodesk-inventor-parameters-between-documents/

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Distinguished Mentor
john.retzlaff
Posts: 947
Registered: ‎11-03-2003
Message 3 of 20 (401 Views)

Re: import iproperties of a part file into an assembly file

09-24-2012 08:13 AM in reply to: cadman777

You can use design assistant to copy iproperties.

John Retzlaff
Distinguished Contributor
cadman777
Posts: 930
Registered: ‎06-30-2005
Message 4 of 20 (391 Views)

Re: import iproperties of a part file into an assembly file

09-24-2012 08:39 AM in reply to: cadman777

Thanks Scott, but that's not what I want to do.

I want to take the iProperties, such as the "Part Number", "Description", etc., and link it from an ipt to an iam, or an iam to an ipt, or whatever.

I already know how to use Parameters in other files.

It's the iProperties that I don't know how or can't recall if it's possible to do.

Any other ideas?

Incidentally, I'm running IV2010.

... Chris
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Employee
johnsonshiue
Posts: 2,345
Registered: ‎04-30-2008
Message 5 of 20 (380 Views)

Re: import iproperties of a part file into an assembly file

09-24-2012 09:35 AM in reply to: cadman777

Hi! If I understand your request correctly, you want to "Derive" iProperties from doc A to doc B, right? Unfortunately, Derive does not support linking iProperties except Parameters (Custom iProperties). But, I think this can be done by using VBA code or iLogic.

Thanks!

 



Johnson Shiue (johnson.shiue@autodesk.com)
Senior Principal SQA Engineer, Inventor
Mechanical Design
Autodesk, Inc.

*Expert Elite*
Cadmanto
Posts: 3,356
Registered: ‎12-07-2011
Message 6 of 20 (367 Views)

Re: import iproperties of a part file into an assembly file

09-24-2012 11:33 AM in reply to: cadman777

I was going to suggest ilogic, but I see I got beaten to the punch.

I am not an ilogic guru so I can't help you to write it, but when it comes to things of this nature that is the path I have seen several go down.

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Distinguished Contributor
cadman777
Posts: 930
Registered: ‎06-30-2005
Message 7 of 20 (362 Views)

Re: import iproperties of a part file into an assembly file

09-24-2012 11:46 AM in reply to: cadman777

Johnson,

Thanks for responding.

I'm on 2010, and don't have the iLogic module.

Questions:

1. Do you know if iLogic is the same for the 2010 add-in, compared to when it became integrated into the program?

2. Do you know where I can pay a reasonable price for the iLogic module for 2010, w/o Autodesk forcing me to pay their "protection racket fee"?

Thanks ... Chris

... Chris
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Mentor
akosi
Posts: 258
Registered: ‎09-17-2010
Message 8 of 20 (271 Views)

Re: import iproperties of a part file into an assembly file

06-27-2013 10:35 AM in reply to: johnsonshiue

is there a way  i can derive a text parameter?

Mentor
jddickson
Posts: 182
Registered: ‎10-07-2011
Message 9 of 20 (259 Views)

Re: import iproperties of a part file into an assembly file

06-27-2013 11:43 AM in reply to: cadman777

There are a couple third party software companies out there that do exactly what you want. They are pretty cheap and you can try most of them for free for 15 days. Just search for “inventor property manager”. The one thing that inventor needs to add is a property manager. Every other cad software has some type of property manager.  

 

If you end up getting iLogic I might be able help you with some code that will get you started.

 

Hope this helps.

Distinguished Contributor
cadman777
Posts: 930
Registered: ‎06-30-2005
Message 10 of 20 (254 Views)

Re: import iproperties of a part file into an assembly file

06-27-2013 03:04 PM in reply to: cadman777

I found iProWiz, but they don't suport 2010 Suite, only 2012/13.

Couldn't find anything else.

Any other ideas?

... Chris
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.