Inventor General Discussion

Inventor General Discussion

Reply
Member
HvHelden
Posts: 5
Registered: ‎01-18-2013
Message 1 of 2 (357 Views)

iLogic - Renumber count of pattern elements?

357 Views, 1 Replies
01-18-2013 04:43 AM

Hello,

 

Since I used Autodesk Inventor 2013 last year, I had an question about numbering en renumbering the count of elements in patterns.

I had an assembly with iLogic for placing and replacing elements, suppressing parts and edit dimensions of parts in 1 assembly. Sometimes, 1 suppressed pattern must be un-suppressed. Before doing this, I would like to set the pattern count and distances between pattern elements in the pattern. How can I do it by using iLogic?

If someone can help I am very appreciated !

 

Kind regards,

H. v Helden

Distinguished Contributor
VdVeek
Posts: 128
Registered: ‎09-13-2012
Message 2 of 2 (346 Views)

Re: iLogic - Renumber count of pattern elements?

01-18-2013 07:06 AM in reply to: HvHelden

The way I do this is by creating some parameters for the pattern.
Create the parameters: HoleNumber : (ul) , HoleSpacing : (mm)
In the pattern function link the pattern number to the parameter: HoleNumber and the spacing to HoleSpacing.
Now it's possible to change the parameters from within an iLogic Rule.

Difficult procedure to write down, hope you understand this. Otherwise let me know.

 

Rob.

Autodesk Inventor 2015 Certified Professional & Autodesk Inventor 2012 Certified Professional.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.