Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
karthur1
Posts: 4,329
Registered: ‎04-27-2005
Message 11 of 14 (149 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 07:25 AM in reply to: vlad.kuzik.95

Expand the View Node.  Right click and choose "New" to create a new view rep. Name it whatever you want or leave it "View1".  Now turn the visibility of the sketches off and they will stay now.

 

With the "Master" view rep selected, it is locked and can't be changed, so the changes that you make to the "Object Visibility" are lost when you close the file.  If you turned off each sketch by selecting it and unchecking the visibility, it should stay on/off even with the Master view representation.

 

 

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 12 of 14 (117 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 10:27 AM in reply to: vlad.kuzik.95

I think you are going about this the wrong way and doing too much work.

 

Sketch1 is unconstrained.

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

 

Sketch2 is not needed.

 

Right click on Sketch3 and then hit F8.

Sketch3 is not constrained and already has way too many constraints and dimensions.

You should not need to repeat dimensions - pattern features rather than sketches.

 

...I gave up after that.  Most of your sketches are not needed and it appears that you should take some time out to go through the tutorials.

 

What book are you using to learn Inventor? 
Have you taken a class?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 13 of 14 (74 Views)

Re: I cannot do anything with this problem. Help me please.

07-16-2013 04:36 AM in reply to: JDMather

I learn Inventor without books. I'm Ukrainian. The Ukraine use method "tourns and mistakes".

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 14 of 14 (68 Views)

Re: I cannot do anything with this problem. Help me please.

07-16-2013 05:00 AM in reply to: vlad.kuzik.95

vlad.kuzik.95 wrote:

I learn Inventor without books. I'm Ukrainian. The Ukraine use method "tourns and mistakes".


I recommend that you spend a couple of weeks going back through the questions posted here finding as many posted files as you can and examine the problem and solutions by editing the sketches and features.

Have you gone through this

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf
http://inventortrenches.blogspot.com/p/inventor-tutorials.html
http://wikihelp.autodesk.com/enu?adskContextId=HELP_TUTORIALS&language=ENU&release=2014&product=Inve...

 

Inventor is a professional program and deserves (requires?) a professional level of preparation.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.