I'm trying to learn to use autodesk inventor pro student version by redoing stuff I've been able to find. Currently I'm trying to learn how to create this kind of thread thingy. Any ideas how to start? (this was parasolid cad file originally which I converted)
I've been trying to go around this several ways but can't seem to be able to do it.
First it would be helpful if we knew waht version of inventor you are using.
SO I am asuning you actually want to "cut" this thread.
OK see the 2 attached ipt files on is internal one is external thread, this is a imperial square cut thread but it will give you some idear of how to do this, just open it as normal and have alook.
I'll also post the IDW files for you in another mesage
And here are the idw files
If it's a single part and the threads are a standard part (listed in the Thread.xls file) and you are on IV2013, install the Thread App and use it to "cut" the threads.
It's the automated way of doing threads on a part, but using the coil-cut method (as posted) teaches you how to do.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!