Inventor General Discussion

Inventor General Discussion

Reply
Contributor
Simonpetter
Posts: 13
Registered: ‎09-14-2013
Message 11 of 18 (189 Views)

Re: How to put this project in an animation

09-18-2013 11:51 PM in reply to: JDMather

How can I mate these with the plate after that It has been bent in the animation?

Namnlös.png

*Expert Elite*
JDMather
Posts: 28,251
Registered: ‎04-20-2006
Message 12 of 18 (182 Views)

Re: How to put this project in an animation

09-19-2013 03:21 AM in reply to: Simonpetter

An assembly file (*.iam) is only a list of hyperlinks to the part files (*.ipt) and a record of assembly constraints (and a bit more).

You must include the part files.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
Simonpetter
Posts: 13
Registered: ‎09-14-2013
Message 13 of 18 (153 Views)

Re: How to put this project in an animation

09-20-2013 02:12 PM in reply to: JDMather

I'm sorry, but I don't follow :smileyindifferent: Are you saying that I should include the part files in an assembly together with plate and then combine it with the larger assembly? I tryed that but I found it difficult to get X grounded as I was moving the plate along the "treadmill". I need X  to be "out of the picture" during the bend/flush process and then at last, get it mated with the plate to "complete" the product.

Thanks

*Expert Elite*
JDMather
Posts: 28,251
Registered: ‎04-20-2006
Message 14 of 18 (147 Views)

Re: How to put this project in an animation

09-20-2013 02:17 PM in reply to: Simonpetter

You posted a *.iam file.

Look at the file size?  See anything unexpected?

 

An assembly file (*.iam) is nothing more than a record of hyperlinks to where the parts (*.ipt files) are located.

There is no geometry in an assembly - only tells Inventor where to find the parts (on your hard drive).

 

In order for an *.iam file to rebuild the assembly from the instructions in the *.iam  the *.iam must have access to the part (*.ipt) files.  You did not attach those files here.

 

You must attach the *.ipt part files here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
Simonpetter
Posts: 13
Registered: ‎09-14-2013
Message 15 of 18 (129 Views)

Re: How to put this project in an animation

09-22-2013 11:47 PM in reply to: JDMather
Contributor
Simonpetter
Posts: 13
Registered: ‎09-14-2013
Message 16 of 18 (127 Views)

Re: How to put this project in an animation

09-22-2013 11:47 PM in reply to: Simonpetter
 
*Expert Elite*
JDMather
Posts: 28,251
Registered: ‎04-20-2006
Message 17 of 18 (98 Views)

Re: How to put this project in an animation

09-23-2013 01:55 PM in reply to: Simonpetter

Missing OJOJ.ipt and xxx.ipt doesn't have dimensions and almost horizontal line - is that intended?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
Simonpetter
Posts: 13
Registered: ‎09-14-2013
Message 18 of 18 (88 Views)

Re: How to put this project in an animation

09-23-2013 11:52 PM in reply to: Simonpetter

Ah, maybe thats the problem. I copied the side of the bend plate (the sketch) to ensure that it would fit perfectly...Namnlös.png

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.