Inventor General Discussion

Inventor General Discussion

Reply
Valued Contributor
WillieArolf
Posts: 93
Registered: ‎04-25-2011
Message 1 of 11 (926 Views)

How to flatten an elbow like a sheet metal development

926 Views, 10 Replies
10-30-2012 01:49 AM

Hi,

 

I have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, and I do not have an idea does it mean.

 

I have attach the file.

 

Maybe, anybody has a workaround if Inventor can not make it. Appreciate your assistance.

Thanks & Regards,

Willie
Autodesk Product Design Suite Premium 2012
Windows 7, 64-bit
Valued Mentor
mpatchus
Posts: 460
Registered: ‎10-22-2008
Message 2 of 11 (916 Views)

Re: How to flatten an elbow like a sheet metal development

10-30-2012 04:05 AM in reply to: WillieArolf

See attached part.

Creating the sheet metal part using the available tools will usually result in a decent flat pattern.

Sometimes it hit or miss, at least in my experience.

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
*Expert Elite*
JDMather
Posts: 26,529
Registered: ‎04-20-2006
Message 3 of 11 (901 Views)

Re: How to flatten an elbow like a sheet metal development

10-30-2012 05:34 AM in reply to: WillieArolf

How will the part be manufactured?

Can you post a picture of an actual finished part?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Mentor
Valued Mentor
wh
Posts: 440
Registered: ‎12-27-2003
Message 4 of 11 (868 Views)

Betreff: How to flatten an elbow like a sheet metal development

10-30-2012 11:53 AM in reply to: WillieArolf

This is a pretty good example, that people shouldn't trust very much in Inventor's Flat patterns, that are made from contour roll.

 

Walter

Valued Contributor
WillieArolf
Posts: 93
Registered: ‎04-25-2011
Message 5 of 11 (847 Views)

Re: How to flatten an elbow like a sheet metal development

10-30-2012 05:09 PM in reply to: mpatchus

Hi Mike,

 

Thank you for the assistance.

 

Is that the correct shape "Rectangle" after invoking the Flatten feature?

 

I thought there should be a slope kinda shape.

Thanks & Regards,

Willie
Autodesk Product Design Suite Premium 2012
Windows 7, 64-bit
Valued Contributor
WillieArolf
Posts: 93
Registered: ‎04-25-2011
Message 6 of 11 (845 Views)

Re: How to flatten an elbow like a sheet metal development

10-30-2012 05:16 PM in reply to: JDMather

Hi JD,

 

The part is made of a flexible jacket (I think you have already encountered this issue before)... I am just looking for an alternative way in making use of Inventors ability in creating flat patterned using the sheet metal development.

 

Honestly, I am trying my best to convience my boss that we should stick in Inventor rather than shifting to solidworks. For the reasons that I am ever since a user of Autodesk products and pretty much used to its features and commands.

 

But, when it comes to flatting an elbow like shape, I do not know how to defend it.

 

That is why, I am trying my best to look for any alternative solutions by of course using Inventors ability.

Thanks & Regards,

Willie
Autodesk Product Design Suite Premium 2012
Windows 7, 64-bit
*Expert Elite*
JDMather
Posts: 26,529
Registered: ‎04-20-2006
Message 7 of 11 (811 Views)

Re: How to flatten an elbow like a sheet metal development

10-31-2012 04:48 AM in reply to: WillieArolf

WillieArolf wrote:

 

 

Honestly, I am trying my best to convience my boss tha....

 

But, when it comes to flatting an elbow like shape, I do not know how to defend it.

 


 

Have your boss invite a VAR to demonstrate this same part in SolidWorks.   :smileylol:

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Mentor
RobJV
Posts: 534
Registered: ‎07-14-2004
Message 8 of 11 (791 Views)

Re: How to flatten an elbow like a sheet metal development

10-31-2012 10:27 AM in reply to: WillieArolf

Buy this program - cheap and they did have it free for 2011.  Not a salesman - just a user.  Download a trial and take a look. 

 

http://www.ductpro.net/

Valued Contributor
WillieArolf
Posts: 93
Registered: ‎04-25-2011
Message 9 of 11 (775 Views)

Re: How to flatten an elbow like a sheet metal development

10-31-2012 05:06 PM in reply to: JDMather

Hi JD,

 

One of my collegue who is so eager to acquire solidworks (well, for the reason that he does not know how to use Autodesk Inventor) did brought my boss to one of the talks in solidworks and they have indeed should him that solidworks can do the sheet metal development after they flatten an object.

 

But, I did told my boss that they may have used a plug-in or third party software to the job. That is why I am asking for an alternative solutions like a plug-in for Inventor to the job.

Thanks & Regards,

Willie
Autodesk Product Design Suite Premium 2012
Windows 7, 64-bit
Valued Contributor
WillieArolf
Posts: 93
Registered: ‎04-25-2011
Message 10 of 11 (774 Views)

Re: How to flatten an elbow like a sheet metal development

10-31-2012 05:12 PM in reply to: RobJV

Hi RobJV,

 

Thank you for sharing this, I will try to DL the trial and look onto it. 

Thanks & Regards,

Willie
Autodesk Product Design Suite Premium 2012
Windows 7, 64-bit
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.