Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
JDMather
Posts: 26,545
Registered: ‎04-20-2006
Message 11 of 14 (712 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

02-01-2013 05:01 AM in reply to: haisin.rusli

What are you trying to trim (can you post screen capture of trim from the example file)?

 

You can use a simple line on a 2D sketch to trim or use the line to create a workplane.
More information is needed on what you are trying to do.

Are you trying to model the perfect parts with no intersection?

Will you be making these parts in-house or sending out to a vendor for manufacture?

What is the manufacturing tolerance?

How will the individual gores be assembled?

Sheet metal like this usually has liberal tolerances and the slight intersections in this technique might not be of enough significance to worry about.  Check with the fabricator out on the shop floor to see if the solution will be good enough.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
haisin.rusli
Posts: 39
Registered: ‎12-20-2011
Message 12 of 14 (688 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

02-03-2013 07:53 PM in reply to: haisin.rusli

@Sam B : I've  thicken them individually, but how to make separate solids? ( how's the next step ? )

Please see the attachment.

 

@JDMather : I just want to do what TheCADWhisperer did. ( not making perfect parts with no intersection )..:smileyhappy:

 

 

Best Regards,

Haisin Rusli

*Pro
sbixler
Posts: 1,881
Registered: ‎09-15-2003
Message 13 of 14 (678 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

02-04-2013 04:16 AM in reply to: haisin.rusli

Use the New Solid button in the Thicken/Offset dialog box.  You can go back and edit your Thicken features as shown:

New Solid.png



Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 1
Windows XP Pro 32-bit, SP3
HP EliteBook 8730w; 4 GB RAM; Core™ 2 Duo T9400 2.53 GHz; Quadro FX2700M
SpaceExplorer/SpaceNavigator NB, driver 3.7.18
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

Active Contributor
haisin.rusli
Posts: 39
Registered: ‎12-20-2011
Message 14 of 14 (650 Views)

Re: How to draw segment elbow 90 degrees and create Flat Pattern ?

02-05-2013 06:46 PM in reply to: haisin.rusli

@Sam B : I've  did it myself, thank you for the explanation! :smileyvery-happy:

 

  

Best Regards,

Haisin Rusli

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.