Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
Orest_iy
Posts: 317
Registered: ‎03-22-2008
Message 1 of 3 (156 Views)

How Materials and appearances are tied together in 2014?

156 Views, 2 Replies
10-28-2013 06:58 AM

Hello,

 

For example I have Aluminium as a Material taken from Autodesk Material lib.

There is nothing mentioned this Material is assigned to any appearance.

It just claimed this Aluminium material has a tab of color properties, called apereances.

             

For example I will make some changes in the Material “Aluminium” color properties; I will set the color to Blue.

Then I will open the appearance window and will see the same color has the appearance “Aluminium Flat”.

If I would change color here it will be the same in Material “Aluminium”

So the Material “Aluminium” and appearance “Aluminium Flat” are tied together.

BUT neither Material nor appearance does not mention they are tied together, why?

Seems like there must be some sort of table how materials and appearances are tied together?

So I have no chance to assign to Material Aluminium any other apereance exept fixed?

 

Best regards,

Orest Yavtushenko

*Expert Elite*
blair
Posts: 4,151
Registered: ‎11-13-2006
Message 2 of 3 (131 Views)

Re: How Materials and appearances are tied together in 2014?

10-28-2013 12:51 PM in reply to: Orest_iy

Materials contrain a standard stock appearance but are primarly concerned with physical properties such as density and other physical properties used for FEA and mold-flow.

 

Appearance is just as it states, you can have a part the is Aluminum for it's physical but have Apperance overrides such as Chrome, Red or Blue.

 

Changing the Apperance will not change the mass of the part, this must be done through the Materials tab.

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 340.52
SpacePilot Pro 3.17.7, 6.17., 4.11
Distinguished Contributor
Orest_iy
Posts: 317
Registered: ‎03-22-2008
Message 3 of 3 (120 Views)

Re: How Materials and appearances are tied together in 2014?

10-28-2013 02:04 PM in reply to: blair

Yes it is clear if I would paint my Aluminium to Red it supposed to keep its physical properties.

I found an answer for my own question.

It was hiden under the “Information” in the appearance tab.

I mean there is a name of corresponded to material appearance wich name could differ from material name.

If I make any changes to certain material appearance I know the affected appearance name.

Here I have a Material and tied appearance name. 

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.