Hole on Bend

[Anonymous]

Inventor seems to have a problem with holes that are punched or drilled on
the bend line of a sheet metal part. See the file "HoleInOne.ipt" in
customer files. As you know, if a hole is round before bending, the bend
will deform it. I need to show this in my part.

Any suggestions?

Thanks,

--Randy

[Anonymous]

Might Cut accross bend work?

--
Drew Fulford B.A.Sc. Systems Engineer
Solid Caddgroup Inc. Burlington, Ontario
Tel: (905)331-9670, Fax: (905)331-7280
Corporate: http://www.solidcadcam.com/

Member of the Autodesk Discussion Forum Moderator Program
Visit my MCAD website @ http://www.mymcad.com/



"Randall A. Maxey" wrote in message
news:CF5FF36DD8E48E4BE9293D91561665E6@in.WebX.maYIadrTaRb...
> Inventor seems to have a problem with holes that are punched or drilled on
> the bend line of a sheet metal part. See the file "HoleInOne.ipt" in
> customer files. As you know, if a hole is round before bending, the bend
> will deform it. I need to show this in my part.
>
> Any suggestions?
>
> Thanks,
>
> --Randy
>
>

[Anonymous]

Drew has it right use a circle and cut across bend won't work on a hole
"Drew Fulford" wrote in message
news:3CD6F0A6988413D23A9B0752037BE4D6@in.WebX.maYIadrTaRb...
> Might Cut accross bend work?
>
> --
> Drew Fulford B.A.Sc. Systems Engineer
> Solid Caddgroup Inc. Burlington, Ontario
> Tel: (905)331-9670, Fax: (905)331-7280
> Corporate: http://www.solidcadcam.com/
>
> Member of the Autodesk Discussion Forum Moderator Program
> Visit my MCAD website @ http://www.mymcad.com/
>
>
>
> "Randall A. Maxey" wrote in message
> news:CF5FF36DD8E48E4BE9293D91561665E6@in.WebX.maYIadrTaRb...
> > Inventor seems to have a problem with holes that are punched or drilled
on
> > the bend line of a sheet metal part. See the file "HoleInOne.ipt" in
> > customer files. As you know, if a hole is round before bending, the
bend
> > will deform it. I need to show this in my part.
> >
> > Any suggestions?
> >
> > Thanks,
> >
> > --Randy
> >
> >
>
>

[jiml]

cut across a bend does work here any way