Inventor General Discussion

Reply
*McConnell, Cory
Post 1 of 8

Hole Note tolerances

103 Views, 7 Replies
10-30-2002 10:53 PM
I posted a screenshot in CF. I placed the hole note and then added a
deviation tolerance to it of +.001 -.002.

--
Cory McConnell
BJ pipeline Inspection
*McConnell, Cory
Post 2 of 8

Re: Hole Note tolerances

10-31-2002 01:24 AM in reply to: *McConnell, Cory
it is a hole note. I can't change the signs while editing the tolerance for
a hole note through the hole note dialog. IV did it on its own.

--
Cory McConnell
BJ pipeline Inspection
"Cory McConnell" wrote in message
news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> I posted a screenshot in CF. I placed the hole note and then added a
> deviation tolerance to it of +.001 -.002.
>
> --
> Cory McConnell
> BJ pipeline Inspection
>
>
*Dotson, Sean
Post 3 of 8

Re:

10-31-2002 01:34 AM in reply to: *McConnell, Cory
Cory,

I just tried the same thing but no dice... mine came out OK.

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Cory McConnell" wrote in message
news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> it is a hole note. I can't change the signs while editing the tolerance
for
> a hole note through the hole note dialog. IV did it on its own.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Cory McConnell" wrote in message
> news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > I posted a screenshot in CF. I placed the hole note and then added a
> > deviation tolerance to it of +.001 -.002.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> >
> >
>
>
*McConnell, Cory
Post 4 of 8

Re:

10-31-2002 02:13 AM in reply to: *McConnell, Cory
Oh good.Now I have to find out why mine is doing it.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> Cory,
>
> I just tried the same thing but no dice... mine came out OK.
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > it is a hole note. I can't change the signs while editing the tolerance
> for
> > a hole note through the hole note dialog. IV did it on its own.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Cory McConnell" wrote in message
> > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > I posted a screenshot in CF. I placed the hole note and then added a
> > > deviation tolerance to it of +.001 -.002.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > >
> > >
> >
> >
>
>
*McConnell, Cory
Post 5 of 8

Re:

10-31-2002 02:17 AM in reply to: *McConnell, Cory
We have to enter the signage? That is different.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> Cory,
>
> I just tried the same thing but no dice... mine came out OK.
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > it is a hole note. I can't change the signs while editing the tolerance
> for
> > a hole note through the hole note dialog. IV did it on its own.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Cory McConnell" wrote in message
> > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > I posted a screenshot in CF. I placed the hole note and then added a
> > > deviation tolerance to it of +.001 -.002.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > >
> > >
> >
> >
>
>
*Dotson, Sean
Post 6 of 8

Re:

10-31-2002 02:22 AM in reply to: *McConnell, Cory
What do mean enter the signage. The +/- buttons? Those have always been
there...

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Cory McConnell" wrote in message
news:134C4873BBCCF6C237206F2F89222938@in.WebX.maYIadrTaRb...
> We have to enter the signage? That is different.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Sean Dotson" wrote in message
> news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> > Cory,
> >
> > I just tried the same thing but no dice... mine came out OK.
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Cory McConnell" wrote in message
> > news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > > it is a hole note. I can't change the signs while editing the
tolerance
> > for
> > > a hole note through the hole note dialog. IV did it on its own.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > > "Cory McConnell" wrote in message
> > > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > > I posted a screenshot in CF. I placed the hole note and then added
a
> > > > deviation tolerance to it of +.001 -.002.
> > > >
> > > > --
> > > > Cory McConnell
> > > > BJ pipeline Inspection
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*McConnell, Cory
Post 7 of 8

Re:

10-31-2002 02:24 AM in reply to: *McConnell, Cory
I don't have signs - I have to type them in. I posted my dialogue box in CF.

--
Cory McConnell
BJ pipeline Inspection
"Sean Dotson" wrote in message
news:FD6482147E94E4051056B8BE56FC3B29@in.WebX.maYIadrTaRb...
> What do mean enter the signage. The +/- buttons? Those have always been
> there...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Cory McConnell" wrote in message
> news:134C4873BBCCF6C237206F2F89222938@in.WebX.maYIadrTaRb...
> > We have to enter the signage? That is different.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "Sean Dotson" wrote in message
> > news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> > > Cory,
> > >
> > > I just tried the same thing but no dice... mine came out OK.
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > remove all #s from email
> > > -----------------------------------------
> > > "Cory McConnell" wrote in message
> > > news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > > > it is a hole note. I can't change the signs while editing the
> tolerance
> > > for
> > > > a hole note through the hole note dialog. IV did it on its own.
> > > >
> > > > --
> > > > Cory McConnell
> > > > BJ pipeline Inspection
> > > > "Cory McConnell" wrote in message
> > > > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > > > I posted a screenshot in CF. I placed the hole note and then
added
> a
> > > > > deviation tolerance to it of +.001 -.002.
> > > > >
> > > > > --
> > > > > Cory McConnell
> > > > > BJ pipeline Inspection
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Dotson, Sean
Post 8 of 8

Re:

10-31-2002 02:29 AM in reply to: *McConnell, Cory
Ok, was talking about the tolerance dialogue in the parameters window. In
which case you'd check "use model tolerances". I see what you mean now.
I'd think they should have buttons in this dialogue too for consistency's
sake..


--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Cory McConnell" wrote in message
news:6311C03821AAECB8DCB642E0EE764DB1@in.WebX.maYIadrTaRb...
> I don't have signs - I have to type them in. I posted my dialogue box in
CF.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "Sean Dotson" wrote in message
> news:FD6482147E94E4051056B8BE56FC3B29@in.WebX.maYIadrTaRb...
> > What do mean enter the signage. The +/- buttons? Those have always
been
> > there...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Cory McConnell" wrote in message
> > news:134C4873BBCCF6C237206F2F89222938@in.WebX.maYIadrTaRb...
> > > We have to enter the signage? That is different.
> > >
> > > --
> > > Cory McConnell
> > > BJ pipeline Inspection
> > > "Sean Dotson" wrote in message
> > > news:649F087FAF44CEBECCF57EDBBE8EF62D@in.WebX.maYIadrTaRb...
> > > > Cory,
> > > >
> > > > I just tried the same thing but no dice... mine came out OK.
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > remove all #s from email
> > > > -----------------------------------------
> > > > "Cory McConnell" wrote in message
> > > > news:4B538ABE6C6A65CF5ACAC598DEE6D75F@in.WebX.maYIadrTaRb...
> > > > > it is a hole note. I can't change the signs while editing the
> > tolerance
> > > > for
> > > > > a hole note through the hole note dialog. IV did it on its own.
> > > > >
> > > > > --
> > > > > Cory McConnell
> > > > > BJ pipeline Inspection
> > > > > "Cory McConnell" wrote in message
> > > > > news:smileyvery-happy:72E64942F5484CA8B9206BED6D794F9@in.WebX.maYIadrTaRb...
> > > > > > I posted a screenshot in CF. I placed the hole note and then
> added
> > a
> > > > > > deviation tolerance to it of +.001 -.002.
> > > > > >
> > > > > > --
> > > > > > Cory McConnell
> > > > > > BJ pipeline Inspection
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post