Inventor General Discussion

Reply
Valued Contributor
dane_m_steyne
Posts: 93
Registered: ‎10-01-2011
Message 1 of 9 (525 Views)
Accepted Solution

glass

525 Views, 8 Replies
09-01-2012 05:18 AM

Is there a appearance material "Glass" in Inventor 2013.Was in 2012 but i cannot find in 2013

 

Dane

yes, you can find it in Inventor Material Library, please see below screereply.pngn capture.

Employee
jingyi.liu
Posts: 121
Registered: ‎08-28-2007
Message 2 of 9 (491 Views)

Re: glass

09-02-2012 06:14 PM in reply to: dane_m_steyne

yes, you can find it in Inventor Material Library, please see below screereply.pngn capture.

Inventor Professional 2015

Jingyi Liu
Quality Assurance Team
Autodesk
Valued Contributor
dane_m_steyne
Posts: 93
Registered: ‎10-01-2011
Message 3 of 9 (453 Views)

Re: glass

09-03-2012 04:55 AM in reply to: jingyi.liu

I have the "Glass" effect but how do i get rid of the black lines.Photo attached for 2013

 

Dane

*Expert Elite*
JDMather
Posts: 26,832
Registered: ‎04-20-2006
Message 4 of 9 (443 Views)

Re: glass

09-03-2012 05:30 AM in reply to: dane_m_steyne

Select a Visual Style other than Shaded with Edges (Shaded or Realistic).

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
dane_m_steyne
Posts: 93
Registered: ‎10-01-2011
Message 5 of 9 (434 Views)

Re: glass

09-03-2012 05:51 AM in reply to: JDMather

I did try that but the lines are still there

 

Dane

*Expert Elite*
JDMather
Posts: 26,832
Registered: ‎04-20-2006
Message 6 of 9 (429 Views)

Re: glass

09-03-2012 05:55 AM in reply to: dane_m_steyne

Is it a solid body or a surface body?

Can you attach the file here?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
dane_m_steyne
Posts: 93
Registered: ‎10-01-2011
Message 7 of 9 (423 Views)

Re: glass

09-03-2012 06:08 AM in reply to: JDMather

it is a solid part...attached

 

Is there anything you noticed that i may have missed

 

Dane

*Expert Elite*
JDMather
Posts: 26,832
Registered: ‎04-20-2006
Message 8 of 9 (418 Views)

Re: glass

09-03-2012 06:16 AM in reply to: dane_m_steyne

No lines on my screen when I do Shaded visual style with your part.

 

Not sure if it could be something you've changed in Tools>Application Options or something to do with your graphics card/driver.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
dane_m_steyne
Posts: 93
Registered: ‎10-01-2011
Message 9 of 9 (410 Views)

Re: glass

09-03-2012 06:29 AM in reply to: JDMather

Thanks JD,i will look at the Tools>Application Options or something to do with your graphics card/driver.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.