Inventor General Discussion

Inventor General Discussion

Reply
Contributor
majusmiles
Posts: 17
Registered: ‎01-03-2013
Message 1 of 5 (332 Views)

flattering surfaces

332 Views, 4 Replies
01-03-2013 02:58 PM

Hi

 

Can i flattern something like You can find on the pic. ( this one is from CATIA ) or something like this. Not everything, just surface by surface. When i draw similar thing, i had problem, because i dont know how to flattern single surface, All of them are curved.

 

Thank You

 

 

*Expert Elite*
blair
Posts: 4,483
Registered: ‎11-13-2006
Message 2 of 5 (316 Views)

Re: flattering surfaces

01-03-2013 04:04 PM in reply to: majusmiles

You should spend some time on Youtube, and seach for: Inventor, +sheet metal

 

There are a number of good tutorials that show different features and functionality of the Sheet-Metal module in Inventor.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Contributor
majusmiles
Posts: 17
Registered: ‎01-03-2013
Message 3 of 5 (297 Views)

flattering surfaces

01-04-2013 01:11 AM in reply to: blair

Yes, there are a number of good tutorials but i couldn't  find the solution, that's why i am asking, i don't wanto to bend, i wander how can i make templates and than solder them toogether.

*Expert Elite*
JDMather
Posts: 28,246
Registered: ‎04-20-2006
Message 4 of 5 (280 Views)

Re: flattering surfaces

01-04-2013 04:25 AM in reply to: majusmiles

A while back (4 or 5 years ago) I posted an example very similar to this.
I will have to search a bit to find it.

It might be better for you to attach your attempt here (modeling the geometry however you can - it doesn't have to be sheet metal).

The solution turns out to be pretty simple.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
majusmiles
Posts: 17
Registered: ‎01-03-2013
Message 5 of 5 (219 Views)

Re: flattering surfaces

01-05-2013 07:35 AM in reply to: JDMather

ok, i made it, standart.itp.,  sketch( spline), model( extrude(surface option)),circular pattern,  surface(trim,delete), convert to sheet metal, model(surface(thicken offset)), create flat patern, sometimes works strange way, probably i don't understand it enouht, :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.