Inventor General Discussion

Inventor General Discussion

Reply
Valued Contributor
57 Posts
2 Kudos
Registered: ‎11-13-2006
Post 1 of 3

Fillet "how to" question

172 Views, 2 Replies
10-11-2012 06:45 AM

Hello.  I remember seeing a solution to a similar problem in the past posted by JD Mather however I cannot seem to locate it now.  I need to apply a fillet along the highlighted edge in the image.  Even using a variable fillet with "0" radius at the start and stop fails.  Any ideas?

 

Thanks;

Nick

*Expert Elite*
28,589 Posts
2,121 Kudos
Registered: ‎04-20-2006
Post 2 of 3

Re: Fillet "how to" question

10-11-2012 06:51 AM in reply to: nickseman

Edge fillet doesn't work?

Face fillet doesn't work?

 

Attach the file here.

Maybe this is what you were thinking about

http://home.pct.edu/~jmather/content/DSG322/Inventor%20Tutorials/Inventor%2011%20Tutorial%204.pdf

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
57 Posts
2 Kudos
Registered: ‎11-13-2006
Post 3 of 3

Re: Fillet "how to" question

10-11-2012 06:59 AM in reply to: JDMather

Mr. Mather:

 

Yes - that was the tutorial I had seen previously.  Thanks for your help.

 

Nick

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post