Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
m.granata
Posts: 154
Registered: ‎04-07-2005
Message 1 of 3 (151 Views)

Fillet Preview Color

151 Views, 2 Replies
10-15-2013 10:51 AM

I am using Inventor Professional 2014 and some of my models end up with a lot of fillet's.  Most of the fillet previews are blue in color but occassional there will be a green color preview.  Why the different colors?  Also, many times on complex fillets, Inventor Stops Responding and ultimately I have to close the software loosing work since the last save.  That is nothing new and also occurred in Inventor 2013.  Is Autodesk working on a repair that will shut down the fillet command without causing Inventor to stop responding?

 

Regards    

*Expert Elite*
JDMather
Posts: 28,254
Registered: ‎04-20-2006
Message 2 of 3 (150 Views)

Re: Fillet Preview Color

10-15-2013 10:56 AM in reply to: m.granata

If you are going to do a complex fillet (or any complex feature).

1. Save before doing that feature.

2. Turn off the Preview.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Product Support
4donwan4
Posts: 215
Registered: ‎10-17-2012
Message 3 of 3 (104 Views)

Re: Fillet Preview Color

10-17-2013 01:12 PM in reply to: m.granata

Its difficult to say what is cuaing the non responding messages. Depending on the fillets we like to see them as far down on the tree as possible, this would help with the recalculation of them model. Not sure about the different preview colors as it might just be trying to draw a contrast in the dialog box but I do not believe there is any signifigance.

Regards,

Don

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.