Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
JDMather
Posts: 27,943
Registered: ‎04-20-2006
Message 11 of 13 (156 Views)

Re: Feature Recognition 2012 not working

10-17-2012 12:09 PM in reply to: DPLOWMAN5757

Attach the original IGES file here.

You might read this (older) document.

 

http://home.pct.edu/~jmather/AU2008/ML205-1P%20Mather.pdf

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
DPLOWMAN5757
Posts: 8
Registered: ‎05-16-2011
Message 12 of 13 (152 Views)

Re: Feature Recognition 2012 not working

10-17-2012 12:43 PM in reply to: JDMather

here is the file I want to convert to a solid *.IPT part

*Expert Elite*
JDMather
Posts: 27,943
Registered: ‎04-20-2006
Message 13 of 13 (149 Views)

Re: Feature Recognition 2012 not working

10-17-2012 12:55 PM in reply to: DPLOWMAN5757

Either the SolidWorks user doesn't know what he was doing or wanted to protect intellectual property ( I would guess the former and this file doesn't do the latter).

 

It should take you about 5-10 minutes to create the solid geometry.

Simply project to 2D sketches and Extrude.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post