Inventor General Discussion

Inventor General Discussion

Reply
Member
bundsgaard.mick
Posts: 4
Registered: ‎03-12-2012
Message 1 of 6 (338 Views)
Accepted Solution

Feature pattern (assembly) issues

338 Views, 5 Replies
09-23-2012 12:41 AM

Hi'.

 

I'm making a model of a spiral stair case, and I'm having some issues with the steps.

I'm attempting to pattern the steps along the railing, using a feature pattern, in my assembly.
I constrain the first step to my railing(using a feature patterned along the railing) and center tube/beam.

When I then pattern the step along the railing, all the steps point "west" like the original step.
This means, that only the first step is attached to the center tube, all the other steps are floating in the air.

I find it a bit odd, because the first step is constrained to the center tube.

 

What am I missing here?  
Let me know if pictures are needed, or I need to make a more detailed description. 

 

 

You must have skipped the suggestion to read that document.

I would have done the design differently, but -

Open Trappe2.ipt and edit Rectangular Pattern 3 and change to settings below, then Update the assembly.

 

Pattern.PNG

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 2 of 6 (324 Views)

Re: Feature pattern (assembly) issues

09-23-2012 06:42 AM in reply to: bundsgaard.mick

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

See if this helps.

If not, attach your assembly here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
bundsgaard.mick
Posts: 4
Registered: ‎03-12-2012
Message 3 of 6 (310 Views)

Re: Feature pattern (assembly) issues

09-23-2012 11:55 AM in reply to: JDMather

I've attached the files.

Ignore the odd dimensions, as this isn't for an actual stair case, but a model.

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 4 of 6 (305 Views)

Re: Feature pattern (assembly) issues

09-23-2012 12:56 PM in reply to: bundsgaard.mick

You must have skipped the suggestion to read that document.

I would have done the design differently, but -

Open Trappe2.ipt and edit Rectangular Pattern 3 and change to settings below, then Update the assembly.

 

Pattern.PNG

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
bundsgaard.mick
Posts: 4
Registered: ‎03-12-2012
Message 5 of 6 (280 Views)

Re: Feature pattern (assembly) issues

09-24-2012 07:25 AM in reply to: JDMather

I actually read the document, but I couldn't find the solution in there, as I have no experience with the pattern function.

I know the design is strange, but again, it's not for a real stair case. The design might change as this drawing is just used to get an idea of, how to draw the project, and decide a scale.

 

I've got the pattern now. Thank you very much!

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 6 of 6 (275 Views)

Re: Feature pattern (assembly) issues

09-24-2012 07:32 AM in reply to: bundsgaard.mick

bundsgaard.mick wrote:

I actually read the document, but I couldn't find the solution in there,


 

 

Hmmm, I am going to have to edit that document - should have been in the image with Tip#41, but I forgot to expand the dialog box.  That paper was for an 60min condensed version of a earlier 90min class.

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.