Fastener Library Question

[rmorris]

We are switching over to IV 6 SP1 from IV 5.3. We are trying to insert fasteners using the fastener library (I know iparts, we are heading that way) and when we use the same defined library that we used in 5.3 we get all kinds of errors. Do we need to define a new fastener library for 6? When I tried defining a new library it seemed to work fine. I just want to find out if we are going to have differnet libraries. We are not migrating all of our files right away. Just a couple of us are working on 6 for new projects.

Thanks in advance

Rob
IGC

[Anonymous]

In a assembly click on the word Model in the top of the browser and select library to get
to the R6 library. (hope I got that right going from memory )

--
Kent
Member of the Autodesk Discussion Forum Moderator Program


"rmorris" wrote in message news:f12a5b1.-1@WebX.maYIadrTaRb...
> We are switching over to IV 6 SP1 from IV 5.3. We are trying to insert fasteners using
the fastener library (I know iparts, we are heading that way) and when we use the same
defined library that we used in 5.3 we get all kinds of errors. Do we need to define a new
fastener library for 6? When I tried defining a new library it seemed to work fine. I just
want to find out if we are going to have differnet libraries. We are not migrating all of
our files right away. Just a couple of us are working on 6 for new projects.
> Thanks in advance
>
> Rob
> IGC
>

[Anonymous]

And make sure you uncheck "Load at Startup/Loaded". There have been problems
with old Library Content Add-In.

--
Dave Jacquemotte
davej@autoconcorp.com


"Kent Keller" wrote in message
news:BF4FE3A94913FB027EE1FCB3056D5DC5@in.WebX.maYIadrTaRb...
> In a assembly click on the word Model in the top of the browser and select
library to get
> to the R6 library. (hope I got that right going from memory )
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "rmorris" wrote in message
news:f12a5b1.-1@WebX.maYIadrTaRb...
> > We are switching over to IV 6 SP1 from IV 5.3. We are trying to insert
fasteners using
> the fastener library (I know iparts, we are heading that way) and when we use
the same
> defined library that we used in 5.3 we get all kinds of errors. Do we need to
define a new
> fastener library for 6? When I tried defining a new library it seemed to work
fine. I just
> want to find out if we are going to have differnet libraries. We are not
migrating all of
> our files right away. Just a couple of us are working on 6 for new projects.
> > Thanks in advance
> >
> > Rob
> > IGC
> >
>
>