Inventor General Discussion

Inventor General Discussion

Reply
Member
3 Posts
0 Kudos
Registered: ‎12-20-2012
Post 1 of 5
Accepted Solution

Extrude/Revolve on a given angle around a cylindrical body

676 Views, 4 Replies
12-20-2012 08:17 AM

I am really struggling in trying to revolve around cylidrical body on a specified angle. I understand the degrees of rotation angle, but i am looking to revolve or extrude a certain shape for the length of the shaft.  Like trying to make a coil or a set of threads.

 

Can anyone help? I have tried to use sweep but sweep doesnt work with two sweep lines.

You are in the wrong forum - you are running Inventor Fusion, not full-featured Autodesk Inventor.

 

You should be over here http://forums.autodesk.com/t5/Inventor-Fusion/bd-p/370

*Expert Elite*
647 Posts
200 Kudos
Registered: ‎11-05-2003
Post 2 of 5

Re: Extrude/Revolve on a given angle around a cylindrical body

12-20-2012 08:37 AM in reply to: MBixler

If you are trying to create a rotation along a length for a coil or to cut a thread try looking at the "coil" command.

 

hope that helps, Sam

----------
Please mark this response as "Accept as Solution" if it answers your question...
but please understand that the solution may not be the answer you're wanting to hear...

If you have found any post to be helpful, even if it's not a direct solution, then please provide that author kudos - spread that love :smileyvery-happy:

Lithium - helping nntp users with mania, depression and headaches
*Expert Elite*
856 Posts
208 Kudos
Registered: ‎10-23-2012
Post 3 of 5

Re: Extrude/Revolve on a given angle around a cylindrical body

12-20-2012 08:43 AM in reply to: MBixler

I've always found that the Coil feature works quite nicely for making, well, coils.

 

YMMV, though.  The button is above and to the right from the sweep feature.


___________________________________________________________

Product Design Suite Ultimate 2013, 2014, 2015

Workstation: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / Radeon R9-270X 4GB
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

Member
3 Posts
0 Kudos
Registered: ‎12-20-2012
Post 4 of 5

Re: Extrude/Revolve on a given angle around a cylindrical body

12-20-2012 08:56 AM in reply to: LT.Rusty

I do not seem to have that coil feature for whatever reason on my tabs?

 

screen shot of tabs.png

*Expert Elite*
28,621 Posts
2,126 Kudos
Registered: ‎04-20-2006
Post 5 of 5

Re: Extrude/Revolve on a given angle around a cylindrical body

12-20-2012 09:27 AM in reply to: MBixler

You are in the wrong forum - you are running Inventor Fusion, not full-featured Autodesk Inventor.

 

You should be over here http://forums.autodesk.com/t5/Inventor-Fusion/bd-p/370

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!