Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
jrm_1971
Posts: 112
Registered: ‎03-31-2011
Message 1 of 16 (6,665 Views)

Export/Importing STL files Inventor Pro 2012

6665 Views, 15 Replies
12-28-2012 06:29 PM

A couple months ago I could export to STL files using Inventor Pro 2012 and a third party could open them on whatever platform they are using. Now when I export to STL files, the third party cannot open them and I cannot open them either on the Inventor Pro 2012 platform. Nothing has changed since the originals were sent to the third party. I have read some of the threads, but there is a lot of STL, none of the ones I read address this problem. The properties from Windows Explorer say the file type is Certificate Trust List (.stl).

*Expert Elite*
blair
Posts: 4,491
Registered: ‎11-13-2006
Message 2 of 16 (6,643 Views)

Re: Export/Importing STL files Inventor Pro 2012

12-29-2012 11:10 AM in reply to: jrm_1971

Possibly if you are trying to open the STL files from the Windows Explorer, it doesn't know what program is used to open the STL file. Can you open from within Inventor. I have no problems here either exporting Inventor to STL or importing STL files.

 

If you wish to open STL files from the Windows Explorer window, you would need to RMB click on the file, select Open With, and then navigate to where the Inventor.Exe file is located.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
*Expert Elite*
JDMather
Posts: 28,254
Registered: ‎04-20-2006
Message 3 of 16 (6,632 Views)

Re: Export/Importing STL files Inventor Pro 2012

12-29-2012 02:28 PM in reply to: jrm_1971

Create a 1mx1mx1m cube and and then Save Copy As type STL.

Attach both the ipt and the stl file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
blair
Posts: 4,491
Registered: ‎11-13-2006
Message 4 of 16 (6,626 Views)

Re: Export/Importing STL files Inventor Pro 2012

12-29-2012 03:48 PM in reply to: jrm_1971

Try opening this one, it works fine on my system at home 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Distinguished Contributor
jrm_1971
Posts: 112
Registered: ‎03-31-2011
Message 5 of 16 (6,595 Views)

Re: Export/Importing STL files Inventor Pro 2012

12-31-2012 02:34 PM in reply to: blair

Nope, exporting and opening in Inventor Pro 2012. It just mysteriously started doing this.

Distinguished Contributor
jrm_1971
Posts: 112
Registered: ‎03-31-2011
Message 6 of 16 (6,594 Views)

Re: Export/Importing STL files Inventor Pro 2012

12-31-2012 02:37 PM in reply to: JDMather

STL file attached cube

*Expert Elite*
blair
Posts: 4,491
Registered: ‎11-13-2006
Message 7 of 16 (6,586 Views)

Re: Export/Importing STL files Inventor Pro 2012

12-31-2012 03:11 PM in reply to: jrm_1971

I am able to ope the cube file here. I'm not on IV2012 though. Are you current on all the SP's and hot-fixes.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Distinguished Contributor
luiww
Posts: 122
Registered: ‎08-09-2010
Message 8 of 16 (6,569 Views)

Re: Export/Importing STL files Inventor Pro 2012

01-01-2013 03:06 AM in reply to: jrm_1971

I wonder if one could open the stl files in the Inventor 2012 environment.  I could not find the stl file type in the drop down list.

*Expert Elite*
blair
Posts: 4,491
Registered: ‎11-13-2006
Message 9 of 16 (6,551 Views)

Re: Export/Importing STL files Inventor Pro 2012

01-01-2013 09:30 AM in reply to: luiww

There is no specific STL extension, just use the (*.*) option to allow you to open any file.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Distinguished Contributor
luiww
Posts: 122
Registered: ‎08-09-2010
Message 10 of 16 (6,521 Views)

Re: Export/Importing STL files Inventor Pro 2012

01-02-2013 05:03 AM in reply to: jrm_1971

I tried and obtained a message "Failed to open document".  I am not able to attach the stl file here owing to its file type.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.