Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
ferrisb
Posts: 181
Registered: ‎12-27-2007
Message 1 of 9 (624 Views)

dwf's of 2d prints look like crap crayola line quality

624 Views, 8 Replies
08-10-2011 11:25 AM

Actually we use the industry standard to describe how these things look, but didn't think I could post that particular word...

Looks bad on the .jpg, looks worse on a projector in a room full of engineers : )

 

Does anyone know how to fix this for dwf's.

 

Changing rez and or plot size, save as vs. plot doesn't seem to do anything.

 

Pretty big issue in my mind.   I found some posts from a few years back and would hope this is fixed by now.

 

Using INV 2009.

Employee
johnsonshiue
Posts: 2,345
Registered: ‎04-30-2008
Message 2 of 9 (590 Views)

Re: dwf's of 2d prints look like crap crayola line quality

08-10-2011 01:12 PM in reply to: ferrisb

Do you mind posting the Inventor files here or send them to me? I would like to take a look and try it out on my side.

Thanks!

 



Johnson Shiue (johnson.shiue@autodesk.com)
Senior Principal SQA Engineer, Inventor
Mechanical Design
Autodesk, Inc.

Distinguished Contributor
ferrisb
Posts: 181
Registered: ‎12-27-2007
Message 3 of 9 (557 Views)

Re: dwf's of 2d prints look like crap crayola line quality

08-11-2011 06:34 AM in reply to: johnsonshiue

Thanks ever so much for the response.

Been trying to get upgraded to 2012 software and problems like this are not helping the cause for the 50k po that we would need to upgrade everyone.

 

 

Employee
johnsonshiue
Posts: 2,345
Registered: ‎04-30-2008
Message 4 of 9 (516 Views)

Re: dwf's of 2d prints look like crap crayola line quality

08-11-2011 01:14 PM in reply to: ferrisb

Hi! I took a deeper look at this behavior. I think I might understand the issue a little better now. The issue here is how line weight is represented in CAD-Free format like DWF or PDF and CAD format like Inventor files. In CAD-Free format, the goal is to give the viewer true WYSWYG (what you see is what you get) experience. This means a line will look in computer screen in the same way as if it was printed on paper: the line weight is fixed and the closer you look and the thicker it becomes.

In CAD system, the software adjust the line weight according to the zoom factor to avoid the comical  representation you mention here. It is to avoid the cluttering of lines when a designer looks closely to the lines. But, in theory, what you see in CAD is not really what you will get on paper.

I am not saying CAD-Free format cannot have the same behavior like in CAD. But, the goal is different. The requirement of WYSWYG results in the behavior you are seeing unfortunately.

Thanks!

 



Johnson Shiue (johnson.shiue@autodesk.com)
Senior Principal SQA Engineer, Inventor
Mechanical Design
Autodesk, Inc.

Valued Mentor
RayFeiler
Posts: 402
Registered: ‎10-07-2008
Message 5 of 9 (510 Views)

Re: dwf's of 2d prints look like crap crayola line quality

08-11-2011 01:25 PM in reply to: ferrisb

Try setting your line weight to it's lowest value. It will not fix your problem but it might look better.

Line Weight.JPG

Product Design Suite Ultimate 2014 64-Bit

Sometimes you just need a good old reboot.
Distinguished Contributor
ferrisb
Posts: 181
Registered: ‎12-27-2007
Message 6 of 9 (492 Views)

Re: dwf's of 2d prints look like crap crayola line quality

08-11-2011 03:22 PM in reply to: johnsonshiue

Thanks, I was affraid of something like that.

Really is a shame because it reflects poorly on the Inventor product line when the dwf used at a presentation has poor quality.

 

I hope they do not decide to stick with dwgs, I prefer working in idw's.

 

Is there another recomendation for presenting my idw's clearly with 3d models at presentations?

My pdfs look fine, but I don't want to have to have a dwg, pdf and dwf for each drawing.

I don't want everyone, anyone really to have access to the idw or iam, but they must see the design intent clearly.

 

Main goal from Drafting 101 is to clearly and accuratly convey ideas from on party to another, at least that's what I was taught.

Should be an easier way to do this.

 

If not please keep at it so I can get my company to keep buying new software!

Distinguished Contributor
ferrisb
Posts: 181
Registered: ‎12-27-2007
Message 7 of 9 (491 Views)

Re: dwf's of 2d prints look like crap crayola line quality

08-11-2011 03:23 PM in reply to: RayFeiler

Did not do the trick, but good suggestion!

Contributor
krystianwiatr
Posts: 18
Registered: ‎10-04-2013
Message 8 of 9 (332 Views)

Re: dwf's of 2d prints look like crap crayola line quality

10-17-2013 08:10 AM in reply to: RayFeiler

RayFeiler wrote:

Try setting your line weight to it's lowest value. It will not fix your problem but it might look better.

Line Weight.JPG


I had similar problem with published dwf's and changing line thicknesses in Layer setting worked for me. Important part was to change edges that are set as your default or standard. I had multiple standards in my library. I also had problem with quality/resolution of shaded views in dwf and inventor. To fix that you need to go to tools->document setting->drawing and change shaded views/use bitmap to offline only. Results are not as good in dwf as in idw, but the difference is huge.

-------------------------------------------------------------
Win7 64-bit
Intel i7 CPU Q 720 @ 1.60GHz
8Gb Ram
NVIDIA Quadro FX 2800M
-------------------------------------------------------------
Autodesk Inventor Professional 2014 Build: 222
Autocad 2014 version l.18.0.0
Vault Professional 2014 Build: 18.1.8.0
Contributor
krystianwiatr
Posts: 18
Registered: ‎10-04-2013
Message 9 of 9 (330 Views)

Re: dwf's of 2d prints look like crap crayola line quality

10-17-2013 08:12 AM in reply to: krystianwiatr

attached are files of before and after..

 

I changed visible edges line thickness from .014" to .002" on layer settings

-------------------------------------------------------------
Win7 64-bit
Intel i7 CPU Q 720 @ 1.60GHz
8Gb Ram
NVIDIA Quadro FX 2800M
-------------------------------------------------------------
Autodesk Inventor Professional 2014 Build: 222
Autocad 2014 version l.18.0.0
Vault Professional 2014 Build: 18.1.8.0
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.