Inventor General Discussion

Inventor General Discussion

Reply
Contributor
kaptenmjau
Posts: 11
Registered: ‎12-01-2011
Message 1 of 4 (447 Views)

Drawing add in title block

447 Views, 3 Replies
01-22-2013 07:57 AM

Is there an add in or something for faster type in the title block in a drawing? Name, title etc?

 Right now the author and date are automatically  but when i save the file to for example to "D1234 hammer" it becomes the part number.

I have to edit the title.

I want to save the file to "D1234 hammer" and the partnumber to be "D1234" and title "hammer".

IS there a add-in that I type the title and name and its auto fill the title block? Or do I have to create a custom title block so the drawing can understand to only to take the numbers from <part name> and the letters becomes <title>?

*Expert Elite*
LT.Rusty
Posts: 852
Registered: ‎10-23-2012
Message 2 of 4 (442 Views)

Re: Drawing add in title block

01-22-2013 08:22 AM in reply to: kaptenmjau

There's a few ways you can do it.

 

I have a lot of the stuff in my drawing template set to pull iProperties from the parts or assemblies shown in the drawing to auto-populate the fields in the drawing.  This still, of course, requires me to completely fill out the information in the part or assembly iProperties.

 

One of the guys that I work with created an iLogic form that gives him a single window where he can type in all the info that he wants from one window, and it will fill in everything without flipping through a bunch of iProperty tabs.  He also at one point created an add-in for Inventor back when we were using 2011 that did the same thing.  Unfortunately I don't know enough about iLogic or VBA to walk you through that one ...


___________________________________________________________

Product Design Suite Ultimate 2013, 2014, 2015

Workstation: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / Radeon R9-270X 4GB
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

Valued Mentor
mpatchus
Posts: 504
Registered: ‎10-22-2008
Message 3 of 4 (441 Views)

Re: Drawing add in title block

01-22-2013 08:24 AM in reply to: kaptenmjau

Either create custom iProperties for the Part Number & Drawing Title, or utilize some of the existing iProperties and map them to your Title Block.  Once done, save the drawing file as your template.

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
Contributor
kaptenmjau
Posts: 11
Registered: ‎12-01-2011
Message 4 of 4 (410 Views)

Re: Drawing add in title block

01-23-2013 12:13 AM in reply to: kaptenmjau

Thx

I will try with iLogic.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.