Inventor General Discussion

Inventor General Discussion

New Member
Posts: 1
Registered: ‎10-31-2012
Message 1 of 3 (438 Views)

Double Qtys using ILogic?

438 Views, 2 Replies
10-31-2012 12:34 PM

I have a large assembly that is controlled by ILogic.  It changes the lengths of parts and adds in duplicate parts as needed.  The assembly makes up one half of the total project.  In reality there will be two of these assemblies mirrored.  I don't want to insert all the parts a 2nd time or create a higher assembly.  I simply want to show Qty in my Parts List and a custom field called "Qty/Job" that doubles Qty.  I can't figure out how to take the value of Qty and mulitply it by 2 using ILogic.  I've also tried creating a custom IProperty for the parts set to "2", but it doesn't add up for each instance.  Is there any way to do this without creating a higher assembly that uses the assembly twice?

Distinguished Mentor
Posts: 541
Registered: ‎12-15-2008
Message 2 of 3 (430 Views)

Re: Double Qtys using ILogic?

10-31-2012 02:30 PM in reply to: carissadoors

you can override the BOM quantity using the following ilogic code

ThisBOM.OverrideQuantity( "Model Data", partNumber, quantity)
however i see no way to multiply the quantity by 2, the code needs a quantity value inserted

ThisBom.OverrideQuantity("Model Data", mypart, 99)

Inventor 2010 Certified Professional
New Member
Posts: 2
Registered: ‎05-25-2013
Message 3 of 3 (272 Views)

Re: Double Qtys using ILogic?

09-11-2013 12:53 PM in reply to: swordmaster

In your assembly, add a custom parameter "TOTAL_PCS", make it unitless

In each part, add a custom parameter "TOTAL_QTY_JOB", make it unitless

Now in your BOM in your idw, add a custom column "TOTAL_QTY_JOB"


Here is the code in the assembly that will make it work. 


quantity = ThisBOM.CalculateQuantity("Model Data", 1234)*TOTAL_PCS
Parameter("jlw-511022-SPP01BR:1", "TOTAL_QTY_JOB") = quantity
quantity = ThisBOM.CalculateQuantity("Model Data", 8811)*TOTAL_PCS
Parameter("jlw-511022-SPP01Y:1", "TOTAL_QTY_JOB") = quantity
quantity = ThisBOM.CalculateQuantity("Model Data", "77-66")*TOTAL_PCS
Parameter("jlw-511022-SPP01BT:1", "TOTAL_QTY_JOB") = quantity


Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.